Invacare 5143IVC instruction sheet Inch BED Extension, Disassembly

84-INCH BED EXTENSION

Assembly, Installation and Operating Instructions

Model No. 5143 and 5143IVC

SAVE THESE INSTRUCTIONS

NOTE: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact Invacare for further instruction.

SAFETY SUMMARY

To ensure the safe installation of the 84-inch bed extension, these instructions MUST be followed:

WARNING

DO NOT install this equipment without first reading and understanding this instruction sheet. If you are unable to understand the warnings, cautions, and instructions, contact a healthcare professional, dealer or technical personnel before attempting to use this equipment - otherwise injury or damage may occur.

Ensure ALL screws and nuts are tight at all times.

The 84-inch Bed Extension Kit DOES NOT change the weight limitation of your bed. Refer to your owner's manual for correct weight limitation.

PURPOSE:

For conversion of a Mobilite 80-inch Split Spring Mattress Platform to an 84-inch Mattress Platform.

TOOLS REQUIRED:

Two (2) 1/2-inch Open End Wrenches

One (1) Vise Grip

Kit Includes the Following:

ITEM	PART NO.	QTY.	DESCRIPTION
1	7000M465	1	Extension Weldment L.H.
2	7000M466	1	Extension Weldment R.H.
3	7000M713	1	Drive Shaft Assembly
4a	7000M469	1	Pull Tube End Assembly (5143)
4b	1118839	1	Pull Tube End Assembly (5143IVC)
5	53000M699	2	Link Fabric Extension
			w/ Open Hooks Attached
6	53000M701	1	Instruction Sheet
7	53000M434	2	Bi-way Locknut
8	54000M641	2	5/16-18 x 1-inch Bolt
9	51000M135	4	Helical Spring

DISASSEMBLY

1.Remove the main drive shaft from the bed.

2.Retract the footboard drive shaft.

3.Disconnect head spring pull tube by removing cotter and clevis pins.

Part No. 53000M701 1 84-Inch Bed Extension