Invacare 5143IVC instruction sheet Attaching Strands to Extension

Page 3

7.Attach second helical spring to the opposite end of the link fabric extension.

8.Using vise grips, secure the helical spring into the mounting hole on the four-inch extension. Refer to FIGURE 4.

9.Repeat this procedure for other link fabric extension.

NOTE: Make sure open end of hooks are positioned down towards the ground/floor.

FIGURE 4 - ATTACHING STRANDS TO EXTENSION

10.To connect the link fabric extension to the head spring, manually raise the head spring and attach open-end hooks to the head spring. Refer to FIGURE 5.

NOTE: Make sure the open end of the hooks are positioned down towards the ground/floor.

FIGURE 5 - ATTACHING LINKS FROM HEAD SPRING TO FOOT SPRING

Part No. 53000M701

3

84-Inch Bed Extension

Image 3
Contents Inch BED Extension DisassemblyAttaching FOUR-INCH Extension to Foot Spring Center Angle InstallationAttaching Strands to Extension Attaching Pull Tube END to Head Drive ARM