Silver Star INFMANU3270 manual Onboard Battery Installation, Wheel Chock Installation

Page 12

I I I . I N S T A L L A T I O N

Onboard Battery Installation

The optional onboard battery is designed for easy installation as it does not require any wires to be routed through or un- der the vehicle.

Follow these steps to install the onboard battery:

1.Align the mounting holes in the battery case bracket with those in the accessory bracket located under the key switch tube. See figure 8.

2.Secure the battery case to the accessory bracket with the supplied hardware. See figure 8.

3.Insert the onboard battery into the battery case, making sure that the connector on the bottom of the battery aligns and fully connects with the mating connector inside the battery case.

4.Plug the battery cord on the bottom of the battery case into the mating connector running from the motor. See figure 8.

Wheel Chock Installation

Your lift is supplied with four adjustable wheel chocks, that when installed, aid in centering your mobility device during loading.

Follow these steps to install the wheel chocks:

1.Drive your mobility device onto the lift platform, posi- tioning it as near to the center as possible.

2.Position the wheel chocks on the platform.

Scooters: Place a wheel chock in front of the front wheel(s) and behind the rear wheels.

Power chairs: Place a wheel chock in front of the drive wheels and behind the rear casters.

3.Take note of the adjustment holes the wheel chocks align with on the platform and remove the chocks.

4.Remove the mobility device from the lift platform.

5.Raise the platform high enough to be able to install hard- ware from beneath it.

6.Position the wheel chock bottom on the underside of the platform, aligning it with the wheel chock top. See figure 9.

7.Secure the wheel chock sections to the platform using the supplied hardware. See figure 9.

8.Repeat these steps to install the remaining wheel chocks to the lift platform.

ACCESSORY BRACKET

BATTERY CASE

BATTERY CASE

BRACKET

Figure 8. Onboard Battery Installation

WHEELCHOCK

TOP

WHEELCHOCK

BOTTOM

SCREWS

Figure 9. Wheel Chock Installation

12

www.silverstarmobility.com

Exterior Lift System

Image 12
Contents SilverStar F E T Y G U I D E L I N E S Phone Number Purchase DateN T E N T S IIIN T R O D U C T I O N Internet and Private Purchases PURCHASER’S AgreementInformation Exchange Product Safety Symbols S a F E T YS a F E T Y Lifting Capabilities Installation Lifting NON-PRIDE ProductsPrelift Inspection Operator PositioningHitch Class Information Hitch ClassesI . Installation Exterior Lift System InstallationFollow these steps to install the lock-down arm Follow these steps to install the Exterior Lift System Hitch Tube AssemblyWiring Harness Installation Wiring Harness InstallationOnboard Battery Installation Follow these steps to install the onboard batteryWheel Chock Installation Follow these steps to install the wheel chocksO P E R a T I O N Exterior Lift System OperationFollow these steps to operate the Exterior Lift System Unlocking the Retractable Tie-down Strap Manual Exterior Lift Operation Manual Crank OperationBattery Charging A T T E R Y C H a R G I N GBattery Replacement Follow these steps to replace the onboard battery figureCare and Maintenance C a R E a N D M a I N T E N a N C EGeneral Cleaning Guidelines Wiring HarnessLift Platform/Metal Components Lift RemovalI . Troubleshooting TroubleshootingWhat if the motor on my lift system will not operate? What if the lift system operates slowly up or down?THREE-YEAR Transferable Limited Warranty ONE-YEAR WarrantyService Checks and Warranty Service I I . W a R R a N T YP E N D I X I Specification S SpecificationsINFMANU3279