Accu-Chek 98/79/EC manual Memory Displays

Page 44

Temperature is above or below the operating range of test strips (14° to 40°C). The result you have obtained may not be accurate. Move to an area between 14° and 40°C, wait 5 minutes, and repeat the test. Do not artificially heat or cool the meter.

or

Memory Displays

The meter is in the “memory” function, allowing you to recall results from memory (see page 20).

or

34

Image 44

Contents Page Page Welcome Page Contents Quick Reference Display Guide About the Accu-ChekSensor Meter About the Accu-Chek Sensor Meter Special Features About the Accu-ChekSensor Comfort Test Strip Inserting the Battery Battery Symbol on the Display Time and date are setBattery must be replaced to continue testing Setting the Beeper, Time, Date, Year, and Hypo Flag Turning the Beeper On or OffDoes the beeper have to be turned on? Proceeding toPress and release the right or left arrow button Setting the Time, Date and Year Page Setting the Hypo Flag Coding/Calibrating Your Meter 731 Testing To begin testing, you will need the following itemsGathering Supplies Performing a Test731 Blood will be drawn What if I still see yellow on the test strip?Blood glucose result is displayed in mg/dL or mmol/L Your Test Results on Marking a Result with a Flag, Asterisk Understanding Your Test Results Do’s and Don’ts Store strips outside original vial Use expired test stripsProper Test Strip Appearance Using Memory To recall results and averages stored in memoryPage Quality Control Checks What are quality control checks?To do a quality control check, you need Accu-ChekSensor Comfort Test StripsPerforming a Quality Control Check Check that the codeGently squeeze the bottle to form one small drop Example of an acceptable Level 1 control resultRemove test strip from meter and discard Understanding Control Results Display Check CleaningCaring For Your Meter Storage and Handling Page Transferring Data Quick Reference Display Guide Meter needs to be codedOFF and insert code key See Meter is ready to accept a test stripBlood glucose result appears on display see Memory Displays Page Display Messages Battery DisplaysBattery power is low Change battery soon Quality Control Check Displays Example of an unacceptable control result Test strip is damaged or Error MessagesYour blood sugar may be Extremely low, an incorrect Page Or cool the meter Technical Data Product Specifications Power Supply 2032 CR 2032, DL 2032 orEquivalent Construction Hand held Protection ClassProduct Safety Information For in vitro diagnostic use Manufactured byWarranty and Service Instructions This warranty does not affect any statutory or other rightsSupplies and Accessories Index ViiiHI display Troubleshooting Any Questions Page 2003/06