Accu-Chek 98/79/EC manual Your Test Results on

Page 25

11.Remove test strip from meter. Discard the strip and lancet in a puncture-proof container with a lid. If you have completed your testing, turn the meter OFF, or the meter will automatically turn off 5 seconds after removing the strip.

If HI is displayed, your blood glucose result may be higher than 600 mg/dL (33,3 mmol/L) (refer to your test strip package insert or

the section Understanding Your Test Results on page 17).

If LO is displayed, your blood glucose result may be lower than 10 mg/dL (0,6 mmol/L) (refer to your test strip package insert or the section Understanding

Your Test Results on page 17).

15

Image 25

Contents Page Page Welcome Page Contents Quick Reference Display Guide About the Accu-ChekSensor Meter About the Accu-Chek Sensor Meter Special Features About the Accu-ChekSensor Comfort Test Strip Inserting the Battery Time and date are set Battery Symbol on the DisplayBattery must be replaced to continue testing Turning the Beeper On or Off Setting the Beeper, Time, Date, Year, and Hypo FlagDoes the beeper have to be turned on? Proceeding toPress and release the right or left arrow button Setting the Time, Date and Year Page Setting the Hypo Flag Coding/Calibrating Your Meter 731 To begin testing, you will need the following items TestingGathering Supplies Performing a Test731 What if I still see yellow on the test strip? Blood will be drawnBlood glucose result is displayed in mg/dL or mmol/L Your Test Results on Marking a Result with a Flag, Asterisk Understanding Your Test Results Store strips outside original vial Use expired test strips Do’s and Don’tsProper Test Strip Appearance To recall results and averages stored in memory Using MemoryPage What are quality control checks? Quality Control ChecksAccu-ChekSensor Comfort Test Strips To do a quality control check, you needCheck that the code Performing a Quality Control CheckExample of an acceptable Level 1 control result Gently squeeze the bottle to form one small dropRemove test strip from meter and discard Understanding Control Results Caring For Your Meter CleaningDisplay Check Storage and Handling Page Transferring Data Meter needs to be coded Quick Reference Display GuideOFF and insert code key See Meter is ready to accept a test stripBlood glucose result appears on display see Memory Displays Page Battery power is low Change battery soon Battery DisplaysDisplay Messages Quality Control Check Displays Example of an unacceptable control result Your blood sugar may be Extremely low, an incorrect Error MessagesTest strip is damaged or Page Or cool the meter Technical Data Product Specifications 2032 CR 2032, DL 2032 or Power SupplyEquivalent Construction Hand held Protection ClassFor in vitro diagnostic use Manufactured by Product Safety InformationThis warranty does not affect any statutory or other rights Warranty and Service InstructionsSupplies and Accessories Viii IndexHI display Troubleshooting Any Questions Page 2003/06