SECTION 16: ARMREST OUTRIGGERS
16.1 Diagram
ARMREST ASSEMBLY SP201
ARMREST ASSEMBLY SP364 (DOMESTIC)2BA X 3/8 POZI PAN MACHINE SCREW
ZINC PLATED F145
OUTRIGGER
M6 X 65 BOLT X 2 1/2TAB SF305 ZINC PLATED F266
ARMREST SOCKET
ON SIDE FRAME
EXTENSION SOCKET SF307
BORE SPACER
M6 NUT ZINC PLATED P80
16.2 | Parts List |
| RJ No |
Armrest Socket Extension Assembly | SF307 |
Armrest Outrigger Tab | SF305 |
M6 x 65 Bolt zinc plated | F144 |
M6 Nut zinc plated | P80 |
2BA x 3/8 Pozi Pan Machine Screw zinc plated | F145 |
16.3 Inspection
Check for damage to sockets.
Ensure spacers are fitted.
Check screw threads are not stripped particularly on push handle bracket.
Ensure armrests locate in push handle bracket when fitted to wheelchair. Check for bending of armrest tube at insertion point.
16.4 Dismantling
Release nuts securing sockets to side frame and remove.
Slide sockets away from frame and remove spacers.
Release extension bracket from push handle.
16.5 Fitting
Replace spacers in side frame sockets.
Slide outrigger sockets into position and insert bolts.
Tighten nuts to 10 lbs/ft (13 Nm).
Hook rear bracket over push handle loop and tighten screw to 3 lbs/ft (4 Nm).