SECTION 2: SPECIFICATIONS
|
| Model 7H | Model 10H |
1. | Overall length | 109cm (43") | 109cm (43") |
2. | Overall width | 64cm (25") | 57cm (23") |
3. | Folded length | 84.5cm (33") | 75cm (291/2") |
4. | Folded width | 28.5cm (111/2") | 28.5cm (111/2") |
5. | Folded height | 50cm (191/2") | 50cm (191/2") |
6. | Maximum weight | 18kg (40 lb) | 17kg (37 lb) |
7. | Weight less armrest | 14.5kg (32 lb) | 13.5kg (30 lb) |
| and footrests |
|
|
8. | Seat plane angle | 10 degrees | 10 degrees |
9. | Seat widths available | 38cm (15") | 38cm (15") |
|
| 43cm (17”) | 43cm (17”) |
10. | Seat depths available | 43cm (17") | 43cm (17") |
11. | Seat height at front | 46cm (18") | 46cm (18") |
12. | Backrest angle | 20 degrees from vertical | 20 degrees from vertical |
13. | Backrest height | 46cm (18") | 46cm (18") |
14. | Footrest to seat | ||
15. | Leg to seat angle | 100 degrees | 100 degrees |
16. | Armrest to seat | 23cm (9") | 23cm (9") |
17. | Front armrest to backrest | 45cm (171/2") | 42cm (161/2") |
18. | Rear wheel diameter | 46cm (18") | 31.5cm (121/2") |
19. | Tyre pressures | 40psi/280 kilopascals (KPA) | - |
| (Barrett 7H only) |
|
|
20. | Maximum user weight | 114kg (18 stone/252 lbs) | 114kg (18 stone/252 lbs) |
21. | Minimum turning radius | 80cm (311/2") | 75.5cm (30") |
For 43cm (17") models. 38cm (15") models are proportionally narrower.
The Barrett 7H and 10H models are designed for a maximum user weight of 114 kilos (18 stone). The frame has been reinforced and components such as push handles, crossbraces and locking link assemblies, along with their associated fixtures, have been upgraded to suit. It is therefore essential that the correct replacement parts are used. Components from previous specification Model 7 and 10 are not compatible and if used would compromise the safety of the wheelchair.