Stow manual PORTO-SCREED PSH- Specifications PSH, PORTO-SCREED PSH Dimensions

PORTO-SCREED PSH— SPECIFICATIONS (PSH)

A

C

B

Figure 1. PORTO-SCREED PSH Dimensions

Table 1. PORTO-SCREED PSH Trowel Specifications

Height	28.0 in. ( 711 mm.)
Width (Less screeding beams)	24 in. (610 mm.)
Length	61 in. (1,550 mm.)
Hand/Arm Vibration	13.4 m/s2
Sound Pressure (A-Weighted)	94 db
Eccentric Speed	3000-4500 RPM
Engagement Speed	2400 RPM
Centrifugal Force	273 lbs. (1215 N) @ 3000 RPM
	615 lbs. (2737 N) @ 4500 RPM
Maximum Screeding	16 Ft. (For One machine)
Path Width	24 in. (61 cm.)
Weight	90 lbs. (41 kg.)

NOTE:

1.Sound pressure is a weighted measure. It is measured at the operator's ear position while the walk-behind PSH is operating at full throttle on concrete in a manner most often experienced in “normal” circumstances. Sound pressure may vary depending upon the condition of the concrete. Hearing protection is always recommended.

2.The vibration level indicated is the maximum RMS (Root Mean Square) value obtained at the handle grip while operating the walk-behind PSH on dry sand in a manner most often experienced in “normal” circumstances.Values were obtained from all three axes of motion. The values shown represent the maximum RMS value from these measurements.

STOW PORTO-SCREED — OPERATION & PARTS MANUAL — REV. #1 (01/20/04) — PAGE 5