Graham Field LF2020, LF2090 user manual Lift and transfer from chair

Page 12

Lift and transfer from chair

WARNING: GF Health Products, Inc. recommends that two attendants be used when transferring a patient to and from a wheelchair.

WARNING: Before transfer, ensure wheelchair wheel locks are in locked position. Wheelchair wheel locks must be in LOCKED POSITION before lowering the patient into the wheelchair, or unexpected wheelchair movement could result, which may result in serious injury to both the patient and the attendants.

1.Fit sling as described in “Fitting Lumex Sit-To-Stand Sling”.

2.Push lift towards patient. Open the base of the lift to go around the chair. Apply the brakes on both rear casters.

3.Position patient’s feet on the foot platform and knees against the knee pad.

4.Attached the sling straps to the hooks.

5.Have the patient’s hands holding the handles. For patients who cannot hold the handles, have them hold their arms around the chest.

6.Press the “UP” button on the hand control.

7.Before the patient’s body is lifted from the chair, stop and make sure the sling is secured and patient’s knees are against the knee pad.

8.The patient should be comfortable with the pressure under the arms. If not, adjust the sling and try another loop option to release pressure.

9.Press the “UP” button until the patient’s body has completely left the chair.

10.Transfer to another object can be done at this position without the patient attending a full standing position.

11.Release the brakes, close the base, and pull the lift away from the chair.

12.Lower the patient to the object intended.

13.To lift patient in a standing position, continue to lift until the patient’s knees are locked in a standing position.

14.At the standing position, patient’s knees may move away from the knee pad.

15.Release the brakes, close the base, and pull the lift away from the chair.

16.Lower the patient to the object intended.

17.Reverse the above procedures when lowering the patient to the chair.

LF2020-INS-LAB-RevC12

12

Image 12
Contents LF2020-INS-LAB-RevC12 GF Health Products, Inc Contents Introduction Intended useSafety Precautions Significance of safety statementsLF2020-INS-LAB-RevC12 Features Easy Lift SIT-TO-STAND FeaturesControl BOX Features Handling Procedures Shipping and Transportation InstructionsUnpacking InspectionAssembly Instructions Checking Battery Capacity Alarm BuzzersCharging the Batteries Important Charging InformationOperating Instructions Preparation before liftingFitting Lumex Sit-to-Stand Sling Lifting the Patient Lift and transfer from bedLift and transfer from chair Care and Maintenance Maintenance Schedule Troubleshooting Symptom Possible Cause ActionSpecifications Limited Warranty GF Health Products, Inc. Graham-Field Index

LF2090, LF2020 specifications

The Graham Field LF2020 and LF2090 models are cutting-edge mobility scooters designed to enhance the independence and freedom of individuals with mobility challenges. These scooters blend functionality, durability, and comfort, catering to a range of users from seniors to those with temporary disabilities.

One of the standout features of both models is their advanced ergonomic design, which focuses on user comfort. The LF2020 incorporates a plush, cushioned seat that allows for extended use without discomfort, while the LF2090 takes this further with an adjustable seating system that can accommodate various body types and preferences. This adaptability is essential for ensuring that users can travel longer distances without fatigue.

Both scooters are equipped with robust frames engineered from high-strength materials, ensuring longevity and resilience. The LF2020 weighs in at a manageable 120 lbs, while the slightly larger LF2090 stands at 130 lbs. Notably, the LF2090's frame is designed to support a higher weight capacity, making it suitable for a wider range of users.

In terms of technology, both models boast high-performance battery systems, with the LF2020 featuring a 24-volt battery that offers a travel range of up to 20 miles on a single charge. Meanwhile, the LF2090 provides an impressive range of up to 25 miles, allowing users to plan longer outings confidently. Charging is simplified with onboard technology that alerts users when it’s time to recharge.

Safety is paramount in the design of Graham Field scooters. Both the LF2020 and LF2090 come standard with head and tail lights, ensuring visibility during dusk and dawn. Additionally, the scooters feature responsive brakes that enhance stopping power and stability on inclines.

Both models feature an intuitive control system that includes a user-friendly throttle and a clear display panel that provides essential information like speed and battery life. The LF2090 also includes advanced features such as a USB charging port for mobile devices, highlighting the growing importance of connectivity and convenience.

Overall, the Graham Field LF2020 and LF2090 scooters are exemplary innovations in the mobility sector. With their well-thought-out design, impressive technological features, and commitment to user comfort and safety, they are excellent choices for those seeking reliable mobility solutions. Whether navigating crowded urban environments or peaceful suburban streets, these scooters are engineered to empower users and improve their quality of life.