Graham Field LF2090, LF2020 Charging the Batteries, Checking Battery Capacity, Alarm Buzzers

Page 9

CHARGING THE BATTERIES

Charge the batteries after assembly.

1.Ensure the control box power switch is ON (i.e., the red button is up).

2.Insert the charger plug into the battery box charging socket (the top slot).

3.Insert the other charger plug into the power supply.

4.All LED indicator lights should be ON during charging.

5.When one green LED indicator light illuminates, the batteries require approximately two to three hours to be fully charged.

6.When only the red LED indicator light illuminates, the batteries require approximately seven to nine hours to be fully charged.

sNOTICE: Do not charge the batteries for more than twelve hours.

7. Unplug the charger FIRST before using the lift.

Info: The lift will not operate while the batteries are charging.

The lift will not operate while the red reset button is down.

8. Replace the batteries when frequent charging is required.

Important Charging Information

Push lift to an appropriate location and charge the batteries with the charger provided.

sNOTICE: Avoid unplugging the pendant and actuator from the control box. Frequent plugging and unplugging of the pendant and actuator to and from the control box may damage the control box.

CHECKING BATTERY CAPACITY

Info: To check remaining battery capacity, press the battery indicator (blue circle with battery symbol) while the lift is not in motion. Remaining battery capacity is indicated by LED indicator lights and explained in the following table.

Red

Amber

Green

Green

Green

Status

 

 

 

 

 

 

ON

ON

ON

ON

ON

Fully charged

ON

ON

ON

OFF

OFF

Needs charge

ON

ON/OFF

OFF

OFF

OFF

Charge immediately—DO NOT use lift

OFF

OFF

OFF

OFF

OFF

Bad batteries or bad connection

ALARM BUZZERS

The control box has an alarm buzzer that provides information on the status of the batteries and the lift. To stop the buzzer, push down the RED RESET button or press the battery indicator.

Buzzer type

Status

Note

2 beeps per second

Low battery (red/amber lights illuminate)

Charge batteries immediately

3 beeps per second

Low battery (red light illuminates)

Charge batteries immediately

6 beeps per second

Very low battery (no lights illuminate)

Charge batteries immediately

3 beeps every other second

Bad battery (no lights illuminate)

Replace batteries immediately

3 long beeps

Overloaded. Batteries are charged but

Maximum load capacity exceeded

 

lift does not lift

 

LF2020-INS-LAB-RevC12

9

Image 9
Contents LF2020-INS-LAB-RevC12 GF Health Products, Inc Contents Intended use IntroductionSignificance of safety statements Safety PrecautionsLF2020-INS-LAB-RevC12 Features Easy Lift SIT-TO-STAND FeaturesControl BOX Features Shipping and Transportation Instructions Handling ProceduresUnpacking InspectionAssembly Instructions Alarm Buzzers Checking Battery CapacityCharging the Batteries Important Charging InformationOperating Instructions Preparation before liftingFitting Lumex Sit-to-Stand Sling Lift and transfer from bed Lifting the PatientLift and transfer from chair Care and Maintenance Maintenance Schedule Symptom Possible Cause Action TroubleshootingSpecifications Limited Warranty GF Health Products, Inc. Graham-Field Index

LF2090, LF2020 specifications

The Graham Field LF2020 and LF2090 models are cutting-edge mobility scooters designed to enhance the independence and freedom of individuals with mobility challenges. These scooters blend functionality, durability, and comfort, catering to a range of users from seniors to those with temporary disabilities.

One of the standout features of both models is their advanced ergonomic design, which focuses on user comfort. The LF2020 incorporates a plush, cushioned seat that allows for extended use without discomfort, while the LF2090 takes this further with an adjustable seating system that can accommodate various body types and preferences. This adaptability is essential for ensuring that users can travel longer distances without fatigue.

Both scooters are equipped with robust frames engineered from high-strength materials, ensuring longevity and resilience. The LF2020 weighs in at a manageable 120 lbs, while the slightly larger LF2090 stands at 130 lbs. Notably, the LF2090's frame is designed to support a higher weight capacity, making it suitable for a wider range of users.

In terms of technology, both models boast high-performance battery systems, with the LF2020 featuring a 24-volt battery that offers a travel range of up to 20 miles on a single charge. Meanwhile, the LF2090 provides an impressive range of up to 25 miles, allowing users to plan longer outings confidently. Charging is simplified with onboard technology that alerts users when it’s time to recharge.

Safety is paramount in the design of Graham Field scooters. Both the LF2020 and LF2090 come standard with head and tail lights, ensuring visibility during dusk and dawn. Additionally, the scooters feature responsive brakes that enhance stopping power and stability on inclines.

Both models feature an intuitive control system that includes a user-friendly throttle and a clear display panel that provides essential information like speed and battery life. The LF2090 also includes advanced features such as a USB charging port for mobile devices, highlighting the growing importance of connectivity and convenience.

Overall, the Graham Field LF2020 and LF2090 scooters are exemplary innovations in the mobility sector. With their well-thought-out design, impressive technological features, and commitment to user comfort and safety, they are excellent choices for those seeking reliable mobility solutions. Whether navigating crowded urban environments or peaceful suburban streets, these scooters are engineered to empower users and improve their quality of life.