Maxon Telecom WL7 operating instructions Maintenance Schedule

Page 7

MAINTENANCE SCHEDULE

NOTE: The Lift Controller counts the number of cycles & lifts over the lifetime of the Lift. One CYCLE is counted each time the Lift is unfolded from the stowed position to floor level, lowered to the ground, raised to floor level, and then stowed. One LIFT is counted each time the Lift is lowered from floor level to the ground, and raised back to floor level. Read the LIFTS and CYCLES counts from the Lift Controller display window periodically so you know when to do the maintenance checks listed below.

NOTE: Only a qualified technician should do the sched- uled maintenance on this page and confirm compliance with Federal Motor Vehicle Safety Standard 403. For the compliance checks, refer to the COMPLETED LIFT INSTALLATION CHECKLIST in Installation Manual MP-04-01.

EVERY 500 LIFTS

Visually check the Lift for bent, broken, or worn out parts, and broken welds.

Check the electrical wiring for worn insulation, and the terminals for corrosion and secure fit. Apply dielectric grease to connections if needed.

Check for loose fasteners (nuts, bolts, screws & rivets). Also, check cotter pins, clevis pins, retaining ring pins & retaining rings for noticeable wear and damage.

Check that all Decals are in place, undamaged, and legible (see DECALS pages).

Check that all anti-slip and safety striping is in place and undamaged (see ANTI-SLIP & SAFETY STRIPING pages).

EVERY 2500 CYCLES

Replace both latch Solenoids P/N 266955-01

EVERY 3000 LIFTS

Check the Inboard Rollstop Actuator Assembly wiring connections, routing, and condition from Actuator to Controller. Repair if needed.

EVERY 5000 LIFTS

Check the large bearing on slider-end of Actuator. If bearing looks worn at first inspection, remove and reinstall bearing with the ends reversed. Replace bearing P/N 266545-03, if follow-on inspections reveal more wear.

Replace both Platform light bulbs P/N 906475-01.

EVERY 10000 LIFTS

Check both Hydraulic Cylinders for leaks. If a film of hydraulic fluid is visible on cylinder seals Lift can still be operated. However, if fluid is dripping from the cylinders, replace them.

7

PATENTS PENDING

Image 7
Contents September Wheelchair Lift Model NO. WL7Patents Pending REV. CPatents Pending Table of Contents Introduction Safety SummaryAdditional Safety Considerations PRE-OPERATION Checks Daily PRE-OPERATION & Operation ChecklistOperation Checks Maintenance Schedule Lift Components see Table Lift Components & TerminologyInboard Right Left Name Description Decals and Decal Placement Decal SET P/N Decals and Decal Placement ANTI-SLIP & Safety Striping Wide Platform ANTI-SLIP & Safety Striping Fold Unfold Operating InstructionsEnter Vehicle DownUnfastening Seat Belt Lower Platform To GroundFastening Seat Belt Fold Unfold Hand Control Exit VehicleLowering Platform To Ground Stow Lift from Vehicle Floor Stow Lift from Ground Level This page Intentionally Left Blank Repositioned Latch Standoff Lift Back View Pump Cover Power Switch LH Pump ShownManual Pump Operation Loading & Unloading OccupantOpen Pressure Release Valve FIG Manual Backup Handle LH Pump ShownClose Pressure Release Valve Outboard Rollstop Raised UP Fastening Seat Belt Unfastening Seat Belt Lower Platform To Ground 24-1Positioning Occupant On Platform Fastening Seat Belt SET Wheelchair Brakes or Switch OFF Powered WheelchairOutboard Rollstop Horizontal PositionNotches Lined UP Vertical PIN Closer ARM Actuator 28-2

WL7 specifications

Maxon Telecom WL7 is an advanced wireless communication device that has gained significant attention in the telecommunications sector due to its innovative design and robust features. Catering to both commercial and personal use, the WL7 is designed to ensure seamless connectivity and reliable communication in various environments.

One of the standout features of the Maxon Telecom WL7 is its superior wireless technology. Equipped with the latest 4G LTE capabilities, it provides high-speed data transfer and enhanced voice clarity, making it ideal for users who demand reliable connectivity for their operations. The device supports multiple bands, ensuring broad compatibility and optimal performance regardless of the user's location.

In addition to its outstanding network capabilities, the WL7 boasts an extended battery life. With its advanced power management technology, users can expect up to 24 hours of continuous operation on a single charge. This feature is especially beneficial for users in remote areas where access to charging facilities may be limited.

The WL7 is also equipped with advanced security features, including end-to-end encryption and built-in firewall protection. This ensures that user data remains secure during transmission, making it an ideal choice for business applications where sensitive information is often exchanged.

Another notable characteristic of the Maxon Telecom WL7 is its ergonomic design. The device is lightweight and compact, making it easy to carry around. Users appreciate the intuitive interface with a large, easy-to-read display that provides essential information at a glance, such as signal strength, battery status, and data usage.

Furthermore, the WL7 supports both voice and video calls, ensuring that users can communicate effectively regardless of their needs. The device is also compatible with various applications, allowing users to leverage additional functionalities through downloadable software.

In summary, the Maxon Telecom WL7 stands out as a versatile and reliable communication device, featuring advanced wireless technology, impressive battery life, robust security measures, and user-friendly design. Whether for personal use or business applications, the WL7 represents a significant advancement in wireless communication, providing users with the tools they need to stay connected efficiently and securely.