X . C A R E A N D M A I N T E N A N C E
CAUTION! If inspection determines excessive wear on the brushes, they must be replaced or motor damage will result. Failure to maintain the brushes could void your Jet 1’s warranty.
To inspect or replace the motor brushes:
1.Remove the seat and body shroud. See VII. “Disassembly.”
2.Unscrew the motor brush caps. See figure 29.
3. | Remove the brushes. |
|
4. | Inspect for wear. | MOTOR BRUSH CAPS |
5. | Replace brushes, if necessary. Contact your authorized Pride | Figure 29. Motor Brush Caps |
| provider for replacement brushes. | |
|
|
CORRECTIVE MAINTENANCE
If the battery indicator gauge does not light up when you turn on the power:
νCheck the harness connections. Make sure they are tight.
νCheck the circuit breaker. Reset it, if necessary, by pushing down the circuit breaker button.
νCheck the battery connections.
If the above conditions prove normal, you can load test the batteries with a battery load tester. These testers are available at automotive parts stores. Disconnect both batteries before load testing and follow the directions that come with the load tester. If either one of the batteries fails the load test, replace both of them. If your Jet 1 still does not power up, contact your authorized Pride provider.
WHEN TO SEE YOUR PRIDE PROVIDER FOR SERVICE
The following symptoms could indicate a serious problem with your Jet 1. If necessary, contact an authorized Pride provider. When calling, have your Jet 1’s model number, serial number, the nature of the problem, and the trouble code if available.
νMotor noise
νFrayed harnesses
νCracked or broken connectors
νUneven wear on any of the tires
νJerky motion
νPulling to one side
νBent or broken wheel assemblies
νDoes not power up
νPowers up, but does not move
US Jet 1 ATS/Rev B/Jul03 | www.pridemobility.com | 39 |
