V I . C O M F O R T A D J U S T M E N T S
To install the joystick controller:
1.Use a
2.Slide the joystick mounting bracket into or out of the armrest to the desired position.
3.Retighten the setscrew.
CAUTION! Do not place the controller cable so that it can be pinched in the seat frame or the power base frame.
After you have become familiar with your Jet 1’s operation, you may find the need to adjust the seat. There are some adjustments you can make to increase your comfort such as seat height, armrest width, armrest angle, footrest height and angle, joystick extension, footrest height, and foot rest angle.
WARNING! If your power chair was configured at your authorized Pride provider or service center, please consult your health care professional before changing the seat position or making any other adjustment. Some adjustments may degrade your power chair’s performance and safety by changing its center of gravity.
SEAT HEIGHT
You can change the seat height manually.
To change the seat height:
1.Removetheseat.SeeVII.“Disassembly.”
2.Remove the nut and bolt from the seat tower. See figure 13.
3.Raise or lower the seat tower to the desired position.
4.Install the nut and bolt into the seat tower.
5.Install the seat.
NUT AND BOLT
Figure 13. Seat Tower Nut and Bolt | Figure 14. Armrest Width |
LOOSEN SETSCREW
TO MOVE ARMREST
US Jet 1 ATS/Rev B/Jul03 | www.pridemobility.com | 23 |
