Pride Mobility Jet 1 How can I get maximum range or distance per charge?, Battery Specifications

Models: Jet 1

1 43
Download 43 pages 23.27 Kb
Page 33
Image 33

I X . B A T T E R I E S A N D C H A R G I N G

How can I get maximum range or distance per charge?

Rarely do you have an ideal driving situation such as smooth, flat, hard terrain with no wind, hills, or curves. More often you are presented with hills, sidewalk cracks, uneven and loosely packed surfaces, curves, and wind.All of these factors will affect the distance or running time per battery charge. Below are a few suggestions for obtaining the maximum range per charge:

νAlways charge the batteries fully prior to any trip.

νMaintain 30–35 psi in the pneumatic drive wheels.

νPlan your trip in advance to avoid inclines if possible.

νLimit baggage weight to essential items.

νTry to maintain an even speed and avoid stop-and-go driving.

What type of battery should I use?

We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Ccell are deep- cycle batteries that are similar in performance.

Use these specifications to reorder deep-cycle batteries:

 

Battery Specifications

Type:

Deep-cycle (AGM or Gel-Cell)

Size:

NF-22

Voltage:

12 volts each

 

 

WARNING! Corrosive chemicals contained in batteries. Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions.

Why do my new batteries seem weak?

Deep-cycle batteries employ a much different chemical technology from that used in car batteries, nickel-cadmium (nicads), or in other common battery types. Deep-cycle batteries are specifically designed to provide power, drain down their charge, and then accept a relatively quick recharge. Lead-acid batteries should be charged as often as possible. They do not have the “memory” that nickel-cadmium batteries have.

We work closely with our battery manufacturer to provide a battery that best suits your Jet 1’s specific demands. Fresh batteries arrive regularly at Pride and are promptly shipped with a full charge. During shipping, the batteries encounter temperature extremes that may influence their initial performance. Heat robs the charge from the battery, and cold slows the power available and extends the time needed to recharge the battery (just as with automotive batteries).

It might take a few days for the temperature of the battery to stabilize and adjust to its new ambient temperature. More importantly, it will take a few “charging cycles” (a partial drain—then a full recharge) to establish the critical chemical balance that is essential to the battery’s peak performance and long life. It will be well worth it to you if you take the time to break in your Jet 1’s batteries properly.

US Jet 1 ATS/Rev B/Jul03

www.pridemobility.com

33

Page 33
Image 33
Pride Mobility Jet 1 owner manual How can I get maximum range or distance per charge?, What type of battery should I use?