Invacare ITSG user manual Care and Maintenance, After Use

Page 7

4 Care and Maintenance

DO NOT use an abrasive detergent, cleaner or cloth during maintenance.

4.1Cleaning

Regular cleaning of the outer cover, inner cover and cushion is recommended.

Outer Cover

￿DO NOT use fabric softeners or bleach. DO NOT machine dry. Air dry only. DO NOT dry in sun.CAUTION

Machine wash the outer cover in cold water on gentle cycle using a mild detergent.

Inner Cover

Hand clean the inner cover using a soft cloth, warm water and a mild soap solution. Rinse off and hang dry.

Foam

Wipe the foam with a damp cloth. DO NOT submerge or soak.

4.2Inspection

WARNING

￿DO NOT continue to use this product if any of the upholstery materials, foams, and/or plastics are found to be deformed, breaking, worn, and/or compressed. Corrective maintenance can be performed at or arranged through your equipment supplier.

Regular inspection of the outer cover, inner cover and cushion is recommended.

5 After Use

Reuse

WARNING: Risk of Injury

￿ Always have a dealer inspect the product for damage before transferring the product to a different user. If any damage is found, DO NOT use the product. Otherwise injury may occur.

Part No 1167615

7

Invacare® Matrx® Stabilite™Cushion

Image 7
Contents Matrx Stabilite Cushion SymbolsGeneral Overview Important InformationWeight Limitation and Model Numbers SafetyIntended Use General Warnings UsageAttaching/Removing the Cushion To/From the Seating Surface Loop Attachment Strips Hook Attachment Strips/No Attachment StripsInstalling the Cover Removing/Installing the Cushion CoversRemoving the Cover Removing the ThinAir Bladder Removing/Installing the ThinAir BladderInstalling the ThinAir Bladder Removing/Installing Removable Leg WedgesAfter Use Care and MaintenanceUSA Limited Warranty
Related manuals
Manual 8 pages 9.12 Kb