Reaching / bending
WARNING: Always turn the casters frontward to provide sta- bility while reaching. If in doubt, ask for assis- tance or use a device that will extend your reach without requiring you to shift your weight.
Although it is not recommended, you may find it occasionally neces- sary to lean or reach from your wheelchair. Consult with your health- care professional for assistance in developing your personal safe reaching or moving techniques suited to your ability and restrictions.
Forward or sideward
WARNING: Do not attempt to reach objects if you are required to move forward in the seat. Do not attempt to retrieve objects from the floor if you must reach down between your knees. Do not shift your weight in the direction that you are reaching and/or bending; this could cause the wheelchair to tip.
1.Maneuver the wheelchair as close as possible to the object you wish to reach.
2.Rotate both casters fully forward: Go forward, and then back the wheelchair toward the object to swing the casters fully forward.
3.Engage both wheel locks.
4.Ensure that the casters are rotated fully forward before reach- ing. If not, repeat step 2.
Backward
WARNING: Do not engage the wheel locks while reaching or bending backward. Should your weight suddenly shift accidentally, it is better to roll in that direc- tion than to tip over.
WARNING: Do not lean over the back upholstery; this could cause the wheelchair to tip.
10 | GF0700137RevA07, September 2007 • Paramount XD Owner’s Manual |