E&J GF0700137RevA07 manual Wheel locks, Adjust wheel locks

Page 20

Wheel locks

Adjust wheel locks

One 3/8" wrench

1.Use a 7/16" wrench to loosen the two clamp bolts until the lock slides on the frame.

2.Place the wheel lock in the locked position and slide it into contact with the tire.

3.Place the wheel lock in the unlocked position and slide it 3/8" closer to the tire.

clamp

clamp

bolt

wheel lock

tire

Adjust wheel lock

4.Use a 3/8" wrench to tighten the two clamp bolts and engage the lock to check the fit. The lock should indent the tire at least 3/8". Tighten clamp bolts securely to eliminate wheel lock movement on frame.

WARNING: Ensure that wheel locks are adjusted so that they lock in place appropriately before oc- cupying or operating wheelchair.

20	GF0700137RevA07, September 2007 • Paramount XD Owner’s Manual

Image 20

Contents Paramount XD Contents Introduction Page Important safety precautions Page Page Getting started Transfer Activities Handling tipsBalance Backward Reaching / bendingForward or sideward Ramps And Inclines Curbs and steps AscentDescent Adjustments Rear wheels & castersAttach arm ArmsRemove arm Attach footrest Front RiggingFootrest-detachable, swingaway Remove footrest Adjust footplate extension length Elevating legrest-detachable, swingaway Adjust legrest elevation Adjust legrest footplate extension lengthTighten crossbraces Adjust elevating legrest panel positionCrossbraces Adjust wheel locks Wheel locksReassembly Transporting the E&J Paramount XDMaintenance Do-it-yourself maintenanceList of tools General careCheck tire wear Check handrimsCheck wheel lock engagement Check anti-tippers optionalCheck rear wheel adjustment Check upholsteryCheck arms Check backposts / push handlesCleaning your Paramount XD Check footrests & elevating legrestsCheck casters Check wheel bearingsTroubleshooting SymptomPage Limited warranty Paramount XD Manual WheelchairPage Index