E&J EJ79X-1, EJ78X-1 manual FOOTREST-DETACHABLE, Swingaway, Attach footrest see picture at right

Page 11

FOOTREST—DETACHABLE, SWINGAWAY

WARNING: Do not stand on the footplates; this could cause the Transport Chair to tip.

Remove footrest for transfer (see picture at right)

1.Pull swingaway release lever toward front of Transport Chair and swing footrest outward.

2.Lift footrest straight up off Transport Chair hinge pins.

hinge plate

swingaway release lever

Attach footrest (see picture at right)

1.Set footrest on outside of Transport Chair so that footrest hinge plates engage Transport Chair hinge pins.

2.Swing footrest inward until release lever locks into place. Ensure that swingaway release lever is locked in place.

WARNING: Ensure that footrests are locked in place before occupying or operating Transport Chair.

remove footrest

(left shown)

Adjust footplate extension length (see picture at right)

1.Loosen latch to free footplate extension inside hanger.

2.Press down on the locking buttons and adjust the footplate to the desired length. Ensure that the locking buttons are completely extended and securely fastened in the adjustment holes.

3.Fasten latch to secure footplate extension inside hanger.

4.Repeat steps 1-3 for the other footplate extension.

5.Ensure that both footplate extensions are securely fastened and that minimum ground clearance is 2 1/2 inches.

WARNING: The footplates’ lowest point should be no closer to the ground than 2 1/2 inches, to permit proper clearance.

WARNING: Ensure that footplates are securely clamped before occupying or operating Transport Chair.

locking

 

button

 

 

hanger

adjustment

 

holes

 

latch

footplate

 

footplate extension,

adjust length

EJ78X-1-INS-LAB-RevC13

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents EJ78X-1 / EJ79X-1 Transport Chair Contents Statements of Significance IntroductionIntended USE Evenly Distributed Important Safety PrecautionsEJ78X-1-INS-LAB-RevC13 Getting Started OperationHandling Tips For Attendant Tilting For attendant curb descent For attendant curb ascent facing forwardFor attendant curb ascent facing backward Tighten crossbraces AdjustmentsCasters CrossbraceAttach footrest see picture at right Adjust footplate extension length see picture at rightFOOTREST-DETACHABLE, Swingaway Fold the Transport Chair see picture above Transporting the Transport ChairPreparing the EJ78X-1 / EJ79X-1 for Transport Unfold the Transport Chair see picture on previous Store Transport Chair in car’s back seatStore Transport Chair in car’s trunk List of tools MaintenanceDo-it-yourself maintenance Check hand grips General careCheck caster tire wear Check wheel lock engagementCheck caster bearings Cleaning your Transport ChairCheck footrests Check front caster stemsSymptom TroubleshootingScope of Warranty Limited WarrantyIndex
Related manuals
Manual 20 pages 1.24 Kb

EJ79X-1, EJ78X-1 specifications

The E&J EJ78X-1 is a cutting-edge product that embodies modern technology and innovation, engineered to meet the demands of a diverse range of applications. This model stands out in the E&J lineup due to its robust performance and user-centric features, making it a preferred choice among professionals and enthusiasts alike.

One of the standout features of the EJ78X-1 is its powerful performance capabilities. It is equipped with a high-efficiency motor that ensures optimal power delivery while maintaining energy efficiency. This motor not only enhances the product's durability but also contributes to a longer lifespan, allowing users to fully leverage its capabilities without the frequent need for replacements or upgrades.

The EJ78X-1 also incorporates advanced smart technology, allowing for seamless integration with various systems. This feature enables users to monitor performance metrics in real-time, facilitating data-driven decision-making. With user-friendly software, the monitoring process is straightforward, providing valuable insights into operational efficiency and potential areas for improvement.

Another remarkable characteristic of the EJ78X-1 is its ergonomic design. Built with user comfort in mind, it features an intuitive control panel that makes operation effortless, even for users with minimal technical expertise. The design also considers portability, ensuring it can be easily transported and used in various settings without compromising performance.

In addition to its impressive performance and design features, the EJ78X-1 places a strong emphasis on safety. It is equipped with multiple safety mechanisms that protect users and the machine itself, significantly reducing the risk of accidents during operation. These safeguards have been rigorously tested and adhere to industry standards, providing users with peace of mind.

Furthermore, the E&J EJ78X-1 is built using high-grade materials, ensuring that it can withstand the rigors of daily use in challenging environments. Its resilience against wear and tear is a testament to E&J's commitment to quality and excellence.

Overall, the E&J EJ78X-1 represents a harmonious blend of power, efficiency, and safety. Its innovative features, combined with user-centric design and robust performance, make it an exceptional choice for those seeking reliability and excellence in technology. Whether used in industrial applications or by hobbyists, the EJ78X-1 is poised to deliver consistent, high-quality results for years to come.
Top Page Image Contents