Perreaux Prisma 350 owner manual Fuse Rating

Page 13

Caution!

Caution!

Note:

Caution!

Fuse Rating

The fuse rating displayed here, refers to the rating of the mains inlet fuse.

For more information on fuse ratings, please refer to Chapter 13 “Specifications”.

Never replace the fuses with any other ratings other than the one specified.

AC Mains Input

An IEC-standard mains input is provided at the rear of the unit. The AC cord set is removable, allowing you to upgrade to a cord set of your preference.

Prior to connection to the AC mains, please check the voltage label on the rear panel to ensure that your unit conforms to the power supply in your area. Never attempt to connect the unit to the incorrect voltage. Severe damage can result from applying incorrect voltage to the unit.

Earth Lift Switch

This switch enables the user to isolate the internal signal earth of the amplifier from the mains earth and is useful if system hum is a problem. Setting this switch DOWN connects the internal signal earth to mains earth and is the normal position. Setting to UP disconnects the signal earth from the mains earth.

Activating this switch has no effect on chassis earth, maintaining the connection to mains earth.

Mains Fuse

The 350 is equipped with a user serviceable AC mains fuse. In the event of fuse failure, always replace with the same type and value fuse. Remember, fuses do not usually blow without a reason. Any doubts about fuse failure should be conveyed directly to your Perreaux dealer.

For more information on fuse ratings, please refer to Chapter 13 “Specifications”.

This is the ONLY user accessible fuse.

Never replace the fuses with any other ratings other than the one specified on the rear panel.

Always ensure your 350 is disconnected from the mains supply before attempting to change the mains fuse.

Remote trigger input and output

The remote trigger system is designed to switch on or off the 350 and any connected peripherals. If the 350 is switched on or off via the remote input trigger, any peripherals connected via the slave trigger output will also be switched on or off.

13

Image 13
Contents Prisma Page Introducing the Perreaux 350 Power Amplifier Ii Important Safety Instructions Page Iii Table of ContentsUnpacking and Placement Ventilation Requirements Instant Install Congratulations Front Panel Functions Rear Panel Functions Fuse Rating Master Trigger Input Balanced Inputs Special Design Philosophies Minimalism in a Wider Context Special Design Features DC Offset Protection Maximising System Potential Watts is twice as loud as 35 Watts, not ten times as loud Power Mosfet Audio Applications Secondary Breakdown High Frequency Response Other Advantages Care and Maintenance Obtaining Service Warranty InformationRegistration Form Extended WarrantyFaultfinding Your System Identifying Isolating Problems Loudspeakers Preamplifier Faultfinding Flowchart 600WRMS into 4S 13SpecificationsDimensions Voltage Gain 30.7dB Physical Dimensions Contact Details Installation Notes

Prisma 350 specifications

The Perreaux Prisma 350 is an innovative and sophisticated integrated amplifier designed to elevate the listening experience for audiophiles and music enthusiasts alike. Renowned for its robust construction and exceptional audio quality, the Prisma 350 stands out as a versatile piece of equipment in the world of high-fidelity sound systems.

One of the key features of the Prisma 350 is its impressive power output. With a strong performance of 175 watts per channel into 8 ohms, it is capable of driving a wide range of speakers, making it highly adaptable to various listening environments. This level of power ensures that music is delivered with clarity and authority, resulting in a rich and immersive listening experience.

The Prisma 350 utilizes advanced Class A/B amplification technology. This design offers the best of both worlds, delivering the warmth and detail often associated with Class A amplifiers while maintaining the efficiency and power of Class B designs. This combination allows the Prisma 350 to reproduce music with accuracy, ensuring that even the most subtle nuances in recordings are faithfully rendered.

In terms of connectivity, the Prisma 350 boasts a comprehensive array of input options. It includes multiple RCA, balanced XLR inputs, and a built-in phono stage for vinyl enthusiasts. Additionally, it features digital inputs such as USB, optical, and coaxial, ensuring seamless integration with modern digital sources. The inclusion of Bluetooth capability further enhances its versatility, allowing for effortless streaming from mobile devices.

Another noteworthy characteristic of the Prisma 350 is its user-friendly interface. The amplifier is equipped with a clear, intuitive display along with a well-designed remote control, making it easy to navigate settings and adjust sound preferences. The integrated DAC (digital-to-analog converter) elevates digital audio quality, ensuring that even high-resolution files are played back with precision.

Constructed with robust materials, the Perreaux Prisma 350 not only looks elegant but is also built to last. Its heat management system ensures optimal performance without overheating, providing peace of mind during extended listening sessions.

In summary, the Perreaux Prisma 350 is a high-performance amplifier that combines power, versatility, and advanced technology to create an exceptional audio experience. With its rich feature set, attention to detail, and superior build quality, the Prisma 350 is an excellent choice for those seeking to enhance their musical enjoyment at home.