E&J 3K01-INS-LAB-RevB13 manual Wheel Locks, Adjust wheel locks

Page 21

WHEEL LOCKS

Adjust wheel locks

M10 wrench

1.Use an M10 wrench to loosen the adjustment bolt until the wheel lock slides on the frame.

2.Place the wheel lock in the locked position and slide it into contact with the tire.

3.Place the wheel lock in the unlocked position and slide it 3/8" closer to the tire.

right rear wheel wheel lock

adjustment bolt right front frame

wheel lock

shown unlocked

4.Use an M10 wrench to

tighten the adjustment bolt and engage the wheel lock to check the fit. The wheel lock should indent the tire at least 3/8".

5.Repeat steps 1-4 for other wheel lock. Tighten the adjustment bolts securely to eliminate wheel lock movement on frame.

WARNING: Ensure that wheel locks are adjusted so that they

lock in place appropriately before occupying or operating wheelchair.

3K01-INS-LAB-RevB13 • Advantage Recliner User Manual

21

Image 21

Contents Recliner Contents Introduction Page Important Safety Precautions Page Page Getting Started Operation of Recliner Lowering and Raising Reclining BackRemovable Headrest Handling Tips BalanceTransfer Activities Reaching / Bending Forward or sidewardBackward Ramps and Inclines AscentDescent Curbs and Steps Adjustments Rear Wheels & Casters Install arm ArmsRemove arm Elevating LEGREST-DETACHABLE, Swingaway Front RiggingRemove elevating legrest Attach elevating legrestAdjust Legrest Elevation Raise elevating legrestLower elevating legrest Adjust legrest footplate extension length Tighten crossbraces CrossbracesWheel Locks Adjust wheel locksMaintenance Maintenance Schedule Do-it-yourself maintenanceGeneral care List of toolsCheck tire wear Check handrimsCheck anti-tippers Check wheel lock engagementCheck handgrips Check upholsteryCheck arms Check rear wheel adjustmentCheck backposts / push handles Check elevating legrestsCleaning your Advantage Recliner Check castersCheck wheel bearings Symptom TroubleshootingScope of Warranty Limited WarrantyPage Index Adjustments