E&J 3K01-INS-LAB-RevB13 manual Adjust legrest footplate extension length

Page 19

Adjust legrest footplate extension length

1. See picture at right. Loosen latch to free footplate extension inside legrest hanger.

2.	Press down on the
	locking button and
	adjust the footplate
	to the desired length.
	Ensure the locking
	button is completely
	extended and
	securely fastened in
	the adjustment hole.
3.	Fasten latch to secure
	footplate extension
	inside legrest hanger.
4.	Repeat steps 1-3 for

locking button

adjustment holes

latch

footplate

hanger

the other footplate

extension.

elevating legrest

footplate extension,

adjust length

5.Ensure both footplate

extensions are securely fastened and that minimum ground clearance is 2 1/2 inches.

WARNING: Ensure that footplates are securely fastened before occupying or operating wheelchair.

3K01-INS-LAB-RevB13 • Advantage Recliner User Manual

19

Image 19

Contents Recliner Contents Introduction Page Important Safety Precautions Page Page Getting Started Lowering and Raising Reclining Back Operation of ReclinerRemovable Headrest Balance Handling TipsTransfer Activities Forward or sideward Reaching / BendingBackward Ascent Ramps and InclinesDescent Curbs and Steps Adjustments Rear Wheels & Casters Arms Install armRemove arm Attach elevating legrest Front RiggingElevating LEGREST-DETACHABLE, Swingaway Remove elevating legrestRaise elevating legrest Adjust Legrest ElevationLower elevating legrest Adjust legrest footplate extension length Tighten crossbraces CrossbracesWheel Locks Adjust wheel locksMaintenance Maintenance Schedule Do-it-yourself maintenanceCheck handrims List of toolsGeneral care Check tire wearCheck upholstery Check wheel lock engagementCheck anti-tippers Check handgripsCheck elevating legrests Check rear wheel adjustmentCheck arms Check backposts / push handlesCheck casters Cleaning your Advantage ReclinerCheck wheel bearings Symptom TroubleshootingScope of Warranty Limited WarrantyPage Index Adjustments