E&J EJ777-1 manual Check arms, Check backposts / push handles, Check footrests, Check casters

Page 22

Check arms

Check arms at least once a month. Inspect for sharp edges or cracks which could weaken the arm, and replace if found. Ensure that all attaching screws are present and tight. Use a Phillips screwdriver to tighten arm pad mounting screws. Check for burrs on the screw heads and replace if found. Ensure that screws do not extend into the padding. Confirm that the posts at base of arm fit correctly in the sockets, snug but not binding.

Check backposts / push handles

Check backposts at least once a month. Ensure that all mounting hardware is secure- ly fastened and that the backposts are not bent or damaged. Ensure that upper back folding mechanisms are secure, work correctly, and that there is no play in upper back fold points. Contact your dealer if you observe back play, cracking or peeling paint or plating.

Check footrests

Check footrests at least once a month. Inspect the locking mechanisms to confirm sure fit. Check for cracks, burrs, or sharp edges, and replace if found. Ensure that the footrest will automatically lock securely in place and will not accidentally unlock.

Cleaning your transport chair

Wipe off base and seat frame frequently, at least once a week, using a soft cloth. Dry the transport chair immediately if exposed to moisture. Clean the frame every three months with a mild soap and water solution. The frame does not need to be waxed. Do not use solvents, abrasive waxes, caustic chemicals or spray silicone. Never use abrasive cleansers; they could scratch the finish. Never use steam or high pressure cleaners. Clean upholstery and plastic components at least once a month with a mild soap and water solution.

Check casters

Check the caster stems for proper rotation at least every three months. The caster fork must swivel freely to facilitate steering and handling. Adjusting the stem nut var- ies the amount of force required to turn the caster. If the nut is too loose, the caster will flutter or shimmy; if the nut is too tight, the transport chair will be difficult to steer. If the caster stem requires adjustment, or the stem bearings require replace- ment, contact your Graham-Field Health Products dealer. Ensure that stems are firmly attached to forks, and that forks and stems are not bent. Evaluate all threads, locking nuts and bearings.

Check wheel bearings

Have your Graham-Field Health Products dealer check caster and rear wheel axle bearings at least every six months.

22

GF0500090RevB07 • EJ777-1 Transport Chair

Page 21 Page 23
Image 22
Page 21 Page 23
Contents EJ777-1 Bariatric Transport Chair Contents Introduction Intended useStatements of significance Important safety precautions EJ777-1 Transport Chair labelsWeight distribution, and ensure that it is properly adjusted Getting started To attendant Handling tipsBalance Transfer Activities For attendant TiltingRamps And Inclines Curbs and stepsFor attendant curb ascent facing forward For attendant curb ascent facing backwardFor attendant curb descent Cross brace AdjustmentsRear wheel & caster Tighten cross bracesArm Rotate arm forward to reinstall see pictures aboveRotate arm backward for transfer see pictures below Footrest-detachable, swingaway Adjust footplate extension lengthAttach footrest see picture at right Attendant wheel locks For attendant Attendant wheel locks, temporary lockPreparing the EJ777-1 for transport Transporting the EJ777-1 transport chairFold the transport chair see picture below Store in the trunk Store in the back seatUnfold the transport chair see picture on previous Maintenance Do-it-yourself maintenanceGeneral care List of toolsCheck tire wear Check anti-tippers optional Check rear wheel adjustmentCheck wheel lock engagement Check hand gripsCheck backposts / push handles Cleaning your transport chairCheck arms Check footrestsTroubleshooting SymptomSpecifications Limited warranty EJ777-1 Bariatric Transport ChairGF0500090RevB07 EJ777-1 Transport Chair Index
Top Page Image Contents