E&J EJ777-2 manual Transfer Activities

Page 9

Transfer Activities

WARNING: Always ensure that the Transport Chair is on a stable, level surface and engage the wheel locks before transfer.

WARNING: Do not step on the footplates; this could cause the Transport Chair to tip. Fold them up, and either detach them, or swing them aside.

WARNING: There is a critical moment when there is little or no seat platform beneath you. Take every precaution to reduce this unsupported distance before you attempt transfer.

Transferring into or out of a Transport Chair is a very difficult maneuver; exercise extreme care when transferring, and never transfer without the aid of an attendant. Consult your physician, nurse, or physical therapist for assistance in developing your individual technique. Make sure that the Transport Chair is stabilized, and will not move or slide during the transfer. Take extra precaution to prevent tipping. Use good body mechanics to prevent personal injury.

FOR ATTENDANT: TILTING

Tilting the Transport Chair backward is gener- ally required to negotiate such obstacles as ramps, inclines, curbs, stairs and door sills. Tilt- ing should only be performed by an attendant. To tilt the Transport Chair backward:

1.If equipped with anti-tippers, remove them temporarily.

2.Grasp the push handles securely and ensure that the hand grips are firmly attached.

3.Ensure that the user's feet are situated flat on the footplates and that arms, hands and fingers are clear of the wheels and any other components.

4. Advise the user, before tilting the Transport Chair backward, what you intend to do and remind the user to lean back.

5.Place one foot on the tipping lever and apply downward force until the Transport Chair is tilted back enough to overcome the obstacle.

6.Lower the front end slowly.

7.If you have removed anti-tippers, replace them now.

EJ777-2-INS-LAB-RevA10EJ777-2 Transport Chair

9

Image 9
Contents EJ777-2 Bariatric Transport Chair Contents Intended USE IntroductionStatements of Significance EJ777-2 Transport Chair Labels Important Safety PrecautionsEJ777-2-INS-LAB-RevA10 EJ777-2 Transport Chair Component Identification OperationHandling Tips Transfer Activities Ramps and Inclines For attendant curb ascent facing backward For attendant curb ascent facing forwardFor attendant curb descent Rear Wheel & Caster AdjustmentsCrossbrace Tighten crossbracesARM Rotate arm up for transfer see pictures belowArm, locked Arm, unlocked Arm, rotated FOOTREST-DETACHABLE, Swingaway Adjust footplate extension lengthRemove footrest for transfer see picture at right Attach footrest see picture at rightFor attendant attendant wheel locks, temporary lock Attendant Wheel LocksTransporting the EJ777-2 Transport Chair Preparing the EJ777-2 for TransportFold the Transport Chair see picture above Store Transport Chair in cars back seat Store Transport Chair in cars trunkUnfold the Transport Chair see picture on previous Do-it-yourself maintenance MaintenanceList of tools General careCheck tire wear Check wheel lock engagement Check rear wheel adjustmentCheck anti-tippers optional Check hand gripsCheck arms Cleaning your Transport ChairCheck backposts / push handles Check footrestsSymptom TroubleshootingSpecifications EJ777-2 Bariatric Transport Chair Limited WarrantyEJ777-2-INS-LAB-RevA10 EJ777-2 Transport Chair Index
Related manuals
Manual 28 pages 31.08 Kb