First Alert digital waterproof fire safe with ready-seal manual

Emergency Override Key / Battery Replacement / Additional Features

Use Care and Maintenance

EMERGENCY OVERRIDE KEY/BATTERY REPLACEMENT

1Locate and open the protective keypad cover on the front of the safe.

2Using a small Phillips head screwdriver, remove

the two screws securing the small Emergency

XZ-10-L

10	L
-
XZ
-

LOW BATTERY INDICATOR

Every time the keypad is activated, the system automatically checks the power level remaining in the batteries. If the power falls below a certain level, the red light will flash every two seconds to indicate the need for new batteries.

BOLTING DOWN YOUR SAFE

Red Light

1	2	3
4	5	6
7	8	9
	0	#

Override Key lock cover located just below the digital keypad. Pull forward on the cover to remove and set aside with the small screws.

For added security your safe can be bolted to the floor. With Ready-Seal™ Technology you are able to bolt your Fire Safe to the floor without compromising the fire or water protection. Please refer to the separate Ready-Seal™ Mounting Instructions included in this package.

3Insert the Emergency Override Key into the lock and turn clockwise to the right.

4Turn the handle upwards to the right to open the safe.

NOTE: IF BATTERIES NEED REPLACING, PROCEED WITH STEP 5.

OTHERWISE, PROCEED TO STEPS 6-8.

5	Slide the battery compartment cover (located inside the safe at the top of
	the door) forward and remove. Remove and properly dispose of the four (4)
	nonworking batteries. Install four (4) new AA batteries. Make sure the batteries
	are installed in the proper direction as indicated in the battery compartment.
	Slide the cover back into place.
6	Remove the Emergency Override Key, and before replacing the lock cover, enter
	your personal passcode to make sure the safe will open.
7	Replace the lock cover using the two small screws and return the Emergency
	Override Key to a secure place away from the safe.

DISABLE / ENABLE SOUND

1	To enable (turn on) the sound during normal	#	*	#
	operation, press the following key sequence:	#		#
2	Repeat the process to turn the sound off.

USE, CARE AND MAINTENANCE

APPROPRIATE USE OF YOUR SAFE

First Alert® Waterproof and Fire Resistant Safes protect paper records and many other valuables.

8 Close and lock the safe door by turning handle downward to the left.

ADDITIONAL FEATURES

SHELF

To allow for greater flexibility and further accommodate your

Verified fire protection for:

	USB	2	.0
		2

CDs & DVDs	USB Drives

677.345 HD12234451231DRIVE.444.123 SERIAL:

MODEL:HARD 1TB

External Hard Drives

particular storage needs, this safe includes one (1) adjustable/ removable shelf.

1 Position shelf so that the gripping ridges are on the top and towards the front of the safe.

2Locate the approximate position in the safe where you

would like to place it and, using the guides molded into	Gripping Ridges
would like to place it and, using the guides molded into
the walls of the safe, slide the shelf into place.

This product is NOT INTENDED to protect audio or video cassettes, floppy discs, data cartridges, film and photos or photo negatives from fire.

Testing shows that the interior temperature of the safe remains below
350°F for one (1) hour during a fire up to 1700°F when used properly.	1
Your safe must be closed and latched in order to properly protect the	1
contents from fire.	HOUR