Glass Frame
Bulb | Bulb |
|
Support
Latch
Figure F
8.Fasten the Bulb Support Latch back into place. See Figure F, above.
9.Slide the Bulb into place against the Glass Frame.
10.Slide the Lens and Lens Frame back underneath the Glass Frame so that the Bulb fits into the Lens Frame and the Screws align with holes along the Lens Frame.
11.Fasten the Glass Cover to the
Lens Frame using the five removed screws. Do not overtighten.
12.Once all connections are secure, set the Magnifying Lamp upright and on its base and tighten the adjusting knobs.
INSPECTION and
MAINTENANCE
WARNING To prevent serious injury
from accidental operation or electric shock:
Before appliance inspection or maintenance, make sure the Power Switch (12) is turned off, the cord is unplugged, and the bulb has cooled.
To prevent serious injury from Appliance failure:
Do not use damaged Lamp. Have the problem corrected before further use.
1.BEFORE EACH USE, inspect the general condition of the Magnifying Lamp. Check for loose screws, mis- alignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condi- tion that may affect its safe operation.
2.Regularly wipe off lamp with a soft and moist cloth to prevent dust accu- mulation.
SKU 97448 | For technical questions, please call | Page 6 |