Uniden BT230 manual Using Your Headset, Turning, Headset on

Page 9

►If the headset loses the connection for more than 30 seconds (e.g., if your phone is out of range), it goes into idle mode. To manually reconnect, press MFB once. If the headset comes back in range in less than 30 seconds, it will automatically reconnect without pressing MFB.

Using Your Headset

Turning the

To turn the headset on, slide the power button to the ON position. The blue

headset on

LED flashes and you hear the turn-on melody (about 4 seconds).

 

 

Turning the

Slide the power button to its original position.

headset off

 

Put your headset on Insert the ear cushion, then wrap the earhook behind your ear.

Everyone’s ear has a sweet spot, a particular angle of the speaker where the audio



Page 8 Page 10
Image 9
Page 8 Page 10
Contents BT230 Bluetooth Headset User’s Guide Contents Color State Meaning What the LED Colors MeanWhat the Tones Mean State MeaningTone Meaning What the Buttons Do Press it to Press & hold it for Seconds toMultifunction button MFB Charge the Battery Setting Up Your HeadsetSeconds to Volume Up Volume DownPair the Headset to Your Bluetooth Phone Connect to Your Phone Once the Headset is Paired Using Your Headset TurningHeadset on Basic FeaturesVoice-Activated Dialing Call WaitingUsing the Multipoint Function Pairing to More than One PhoneUsing Both Phones Try Troubleshooting and MaintenanceMaking sure the call connected and is still active Reset the HeadsetNoise or Static on the Headset Battery lifeCleaning the headset Important Safety InstructionsAvoiding hearing damage FCC Notice Important Note Radiation Exposure Statement Industry Canada statementPage Uniden America Corp. Ft. Worth, Texas
Top Page Image Contents