Uniden DSC BK manual Distress

Page 18

DISTRESS

Note: You must set the user MMSI in order to send a Distress call. Please see page 20 to set the MMSI.

This feature will allow you to transmit a Distress call.

1.In order to transmit a Distress call,

press and hold DISTRESS for 5 seconds. When DSC appears on the display, press SELECT to send the Distress call.

2.The Distress call is transmitted and it waits for about 210 - 270 seconds for an acknowledgement from the Coast

Guard before the Distress call is resent. After the Distress call has been sent, the Distress alert will sound every other second. The radio will automatically change to channel 16, and it also watches channel 70 in the background until an acknowledgement signal is received from the Coast Guard shore station.

To cancel the Distress call, press 16/9.

3.If an acknowledgment is not received, the Distress call is repeated until an acknowledgment is received from the Coast Guard shore station.

16

Image 18
Contents Page Maritime Radio Services Operation Contents Uniden Solara DSC Included with your Solara DSC Solara DSCControls and Indicators Front panel/MicrophoneRear Panel Connectors Page Installation Choosing a LocationSolara DSC Antenna Selection and Installation Engine Noise SuppressionAntenna Considerations Installing the Solara DSC Power On/Off OperationLast Channel Memory Squelch Coast Guard Channel 16/CHANNEL 9 Communications Selecting a ChannelWeather Channels All Channel Scan Weather AlertSetting the Transmit TX Power Recommended Emergency Broadcast Instructions Distress Digital Selective Calling DSC IndividualALL Ships Routine , Safety User Mmsi To set User Mmsi codeNmea Technical Setup Optional AccessoriesSolara DSC NMEA0183 GPS Input Connection Specification VHF FM Marine Radio Telephone International Channels Canadian Channels Specification GeneralTroubleshooting Symptom Cause RemedyCare and Maintenance Page Three Years Limited Warranty UTZZ01600ZZ