Motorola XTS 3000 manual Reprogram Request, Select Enable/Disable

Special Radio Features

2.Talk and listen as usual.

3.When the dynamic regrouping is cancelled by the dispatcher, the radio will automatically return to the present knob/switch zone and/or channel position.

Reprogram Request

This feature allows you to notify the dispatcher that you want a new dynamic-regrouping assignment.

1.Press the Reprogram Request Button (if programmed, see page 2).

2.The reprogram request is automatically sent to the dispatcher.

A

B

C

2
page
See
your
for
radio’s-	.
feature
programming
control

3a. If you hear one beep, press the PTT Switch to resend the reprogram request again.

Note	If the dispatcher fails to
	acknowledge the reprogram

request within six seconds, a low- pitched alert tone sounds. Try again.

3b. If you hear five beeps, the reprogram request was acknowledged by the

OR dispatcher.

Select Enable/Disable

The dispatcher may classify regrouped radios into either of two categories: select enabled or select disabled.

•Select-enabled radios are free to make channel changes to any available channel, including the dynamic-regrouping channel.

•Select-disabled radios cannot change channels since the dispatcher has specifically chosen to force the radio to remain on the dynamic- regrouping channel.

Note

The scan, telephone call, or Private Conversation call feature cannot be selected while your radio is select disabled.

26