TROUBLESHOOTING
TROUBLESHOOTING
The status light won’t | • Make sure the AC adaptor is plugged into the base and wall outlet | |
illuminatewhen the handset | • Make sure the handset is properly seated in the base. | |
is placed on the base. | • Make sure the charging contacts on the handset and base are clean. | |
|
| |
The audio sounds weak | • Move the handset and/or base to a different location away from | |
and/ or scratchy. | metal objects or appliances and try again. | |
| • Make sure that you are not too far away from the base. | |
| • XSA955 only - Press | /channel while on a call to change the |
| operating channel. |
|
| • XSA965 only - Press | /channel while on a call to change the |
| operating channel. |
|
|
| |
Can’t makeor receive calls. | • Checkboth endsof the telephoneline cordare plugged in firmly. |
•Make surethe AC adaptoris plugged into the baseand wall outlet.
•Disconnect the AC adaptor for a few minutes, then reconnect it.
•Make surethat you are not too far from the base.
•Charge the handset.
The handset doesn't ring or | • The battery pack may be weak. Charge the battery for |
receive a page. | • The handset may be too far away from the baseunit. |
| • Place the baseunit away from appliances or metal objects. |
|
|
Handset number 1 or | • Place one handset at a time on the main base for 5 seconds each. |
number 2 not working |
|
(XSA965 only) |
|
|
|
If you still have a problem. | Australia: www.uniden.com.au New Zealand: www.uniden.co.nz |
Page 33