GE TC28031 Series, 28011 Handset Sound Signals, Troubleshooting Guide, Telephone Solutions

Page 38

Handset Sound Signals

Signal	Meaning
A long warbling tone (with ringer on)	Signals an incoming call
Three short beeps	Page signal
One long beep	Confirmation tone for the
	completion of a function
One short beep	Ring alert tone
(during room monitoring mode)
One short beep (every 7 seconds)	Low battery warning

Troubleshooting Guide

Telephone Solutions

No dial tone

•Check and repeat installation steps:

Ensure the base power cord is connected to a working electrical outlet .

Ensure the telephone line cord is connected to the base and the wall jack.

•Connect another phone to the same jack; if there is still no dial tone, the problem might be your wiring or local service.

•The handset may be out of range of the base. Move closer to the base.

•Ensure the battery is properly charged (16 hours).

•Ensure the battery pack is installed correctly.

•The handset should beep when you press the TALK/CALL BACK button and the charge indicator on the base should be lit when the handset rests in the cradle. If not, the battery may need to be charged.

•Place handset in charge cradle for at least 20 seconds to reset the unit.

Handset does not ring

•Make sure the handset ringer switch is turned ON, this can be done through the handset setup menu - Ringer Volume.

•The handset may be out of range. Move closer to the base.

•You may have enabled Do Not Disturb (DND). Make sure the DND is off.

•You may have too many extension phones on your line. Try unplugging some phones.

•Check for dial tone.

38

Image 38

Contents For use only with Rights of the Telephone Company Equipment Approval InformationNotification to the Local Telephone Company Licensing Interference InformationHearing Aid Compatibility HAC FCC RF Radiation Exposure StatementTable of Contents Icture D ownload Ecording R inger T onesTelephone Jack Requirements IntroductionBefore You Begin Make sure your package includes the items shown hereUse caution when installing or modifying telephone lines InstallationImportant Installation Guidelines Digital Security SystemHandset Layout Ringer buttonExtra Charging Cradle Installing the PhoneInstalling the Handset Battery Programming the Telephone RegistrationArea Code Phone SettingLanguage LanguageHandset Name Handset NameDeregistration DeregistrationGlobal De-Registration Default SettingYES. The default is YES On the displayColor Scheme Display SettingWallpaper WallpaperFrom the Sound Setting menu Sound SettingRinger Volume Set ContrastRemote Access Security Code Answering System Remote AccessRemote Access from Cordless Handset Key ToneScreening Calls from the Handset Ring to AnswerNew Message Alert AnswererTelephone Operation Exit Flash/Call WaitingLast Number Redial Paging from the Base/GroupHandset to Handset Paging Ringer Volume ShortcutMute IntercomDo Not Disturb DND Room MonitorHandset to Handset Intercom Call Advanced Intercom FeaturesIntercom Operation Receiving an Intercom CallThree-way Conferencing Using Intercom with External Telephone CallsTwo-Way Calling Call Waiting Caller ID Caller ID CIDCall Transfer Transferring Calls to Other HandsetsStoring CID Records In CID Memory CID Error CodesReceiving CID Records Reviewing CID RecordsDigit area code + Storing CID Records into Phone BookLong distance code 317-888 8888 +3-digit area code 888-8888Deleting All CID Records Phone BookDeleting a CID Record Adding Phone Book EntriesDisplay shows Enter Number Press the Select button to enter the phone bookUse the 6 or 5 button to scroll to ADD Record Number up to 20 digits, including pausesStoring the Last Number Dialed Reviewing Phone Book RecordsDialing a Phone Book Record Editing a Phone Book RecordDeleting a Phone Book Record DeletedChain Dialing from Phone Book One-Time Software InstallationPicture Download Download Your Own ImageChoosing the Downloaded Image as Wallpaper Recording Ringer TonesImage Downloading Assigning the Downloaded Image to Phone Book RecordPress the Select button to enter Record with Included Audio Cable or an Optional HeadsetUse the 6 or 5 button to scroll to REC Ring Tone Press the Select button to enter the count- down display Record with the Handset MicrophoneMicrophone Or you may press the Select button any time to stop Changing the Battery Belt Clip and Optional HeadsetBattery Safety Precautions Display MessagesPrompt telling you to enter the name in one Indicates the battery needs to be chargedPower has been interrupted. Move closer Prompt telling you to enter a telephone numberTelephone Solutions Handset Sound SignalsTroubleshooting Guide Caller ID Solutions Handset displays Handset Needs RegistrationCauses of Poor Reception Battery SolutionsCaller ID Error Message General Product CareHandset Charge Cradle 2702 Belt Clip 2703 Headset Black ServiceAccessory Information 2660Limited Warranty If you purchased your product outside the USA Limitation of WarrantyHow state law relates to this warranty Index Installation Thomson Inc