M o u n t i n a c a r
1.Insert the catch on the mounting device into the
slot at the back of the speakerphone (1). Rotate the speakerphone clockwise until it locks into place (2).
2. Locate a safe mounting surface on the windscreen, and clean the surface thoroughly with a glass cleaner and a clean towel.
If the ambient temperature is below +15°C (60°F), carefully warm the surface and the suction cup with a hair dryer to ensure a firm grip on the windscreen. Ensure that you do not heat the windscreen excessively to avoid damage to it.
3.Press the suction cup of the mounting device against the windscreen (3), and rotate the mounting device clockwise (4) to create a vacuum between the suction cup and the windscreen. Check that the suction cup is firmly attached.
4.Turn the speakerphone to the desired position.
To detach the speakerphone from the mounting device, rotate it anticlockwise.
To detach the suction cup from the windscreen, rotate the mounting device anticlockwise, and pull the strap located on the edge of the suction cup.
■Attach to a dashboard
You can attach the speakerphone to the dashboard using the supplied mounting device and adhesive pad.
1.Ensure that the surface where you attach the adhesive pad on the dashboard is flat, dry, and free from dirt and dust.