B a s i c u s e
■Answer or reject a call
When you receive a call, you hear a ringing tone through the speakerphone. The caller’s number is displayed on the speakerphone if the cellular network supports this function. The name saved with the number is displayed if you have copied the name and number to the speakerphone. If the name and number are not available, only 
is displayed.
To answer the call, press the answer/end key.
To reject the call, press the answer/end key twice.
■Adjust volume
To increase the speakerphone volume during a call, turn the volume wheel right. To decrease the volume, turn the wheel left. The volume level is displayed on the speakerphone.
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
■Switch a call to the connected device
To switch a call from the speakerphone to the connected device, switch off the speakerphone, or press and hold the answer/end key for about 2 seconds. When the call is switched to the connected device, 
is displayed.
To switch the call back to the speakerphone, switch on the speakerphone (if it is off), or press and hold the answer/end key for about 2 seconds.
■Clear settings or reset
To clear the pairing settings and copied contacts from the speakerphone, press and hold the power key and the answer/end key (for over 4 seconds) until the red and green indicator lights start to alternate and 
is displayed. After the settings are cleared, the speakerphone enters pairing mode.