Redial
Press the redial button to quickly dial the last number you called (up to 32 digits).
If you get a busy signal, and want to keep dialing the number, press redial to dial the number again.
In Use Indicator
When the charge/in use indicator on the base is lit, the handset is either in use or charging. The charge/in use indicator on the base and the
Flash
If you subscribe to the combined Call Waiting Caller ID service from your local telephone company you will receive Caller ID information (if available) on Call Waiting calls. During a phone call, you will hear a beep to indicate another call is waiting on the line and Caller ID information for the waiting call shows on the handset display. To connect the waiting call, press the flash/ program button on the handset and your original call is put on hold. You may switch back and forth between the two calls by pressing the flash/program button.
TIP: Do not use the talk/call back button to activate custom calling services such as call waiting, or you’ll hang up the phone.
20