QUICK REFERENCE GUIDE
•Enter your PIN code (Default is 0000) and press 
.
•Select LANGUAGE.
•Select the desired language and press 
.
Transfer a Call - Unsupervised
•While on a call, select press HOLD. The current call is placed on hold.
•Press OPTIONS and then select TRANSFER.
•Dial the extension of the transfer destination.
•Press 
or 
.
Transfer a Call - Supervised
•While on a call, press HOLD. The current call is placed on hold.
•Dial the extension of the transfer destination.
•Press 
or 
.
•Wait until the called party answers, announce the transfer.
•Press OPTIONS and then select TRANSFER.
Check Call Log (Optional)
•From idle mode, press CALL LOG.
•Select the type of calls: Missed, Incoming, Outgoing, or All Calls.
•Select the call.
•Press 
.
About Feature Access Codes
You can dial codes to activate Call Forwarding features and Do Not Disturb. The feature access codes provided in this guide are the default system codes.Your system may be programmed with different codes. Contact your System Administrator to obtain the codes assigned for your system.
Note that when your handset is programmed in a personal ring group (that is, twinned to your desktop phone) Call Forwarding feature access codes are not supported from your handset.Forward a Call
Note that when call forwarding active, there is nothing on the handset that indicates it is enabled. To program and activate Call Forward:
•Dial the appropriate Call Forward Feature Access code followed by the destination number. Note that the following are default codes. Your system may use different codes. Contact your System Administrator for a list.
-Always: ∗68
-Busy: ∗61
-No Answer: ∗68
-Cancel All Forwarding ∗70
•Press 
or 
.
•Press 
.
To cancel Call Forward:
•Dial the Cancel All Call Forward Feature Access code (Default code is ∗70)
•Press 
or 
.
•Press 
.
M Mitel (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. © 2012, Mitel Networks Corporation. All rights reserved.