QUICK REFERENCE GUIDE
Troubleshooting
Symptom |
| Possible Cause | Corrective Action | |
|
|
| ||
Unable to remove belt clip | You are not inserting the removal | Insert the removal tool as shown in | ||
cover using removal tool. | tool far enough into opening be- | the graphic on the previous page. | ||
|
|
| tween the handset and clip cover. |
|
|
|
| ||
Handset display is black. | Handset is in power saving mode. | Press any key. | ||
|
|
|
|
|
|
|
| Battery is drained. | Put handset in charging cradle to re- |
|
|
|
| charge battery. |
|
|
| ||
Handset does not charge. | Power to handset charging cradle is | Ensure that power cable is inserted | ||
|
|
| not connected. | in handset charging cradle. |
|
|
| Battery is not inserted correctly. | Check that the battery is inserted cor- |
|
|
|
| rectly. Refer to Installation Guide for |
|
|
|
| details. |
|
|
| Battery life is exceeded and no lon- | Obtain replacement battery from |
|
|
| ger accepts charge. | your System Administrator and re- |
|
|
|
| place. |
Cannot | enable | features | Feature is not enabled for your | Contact your System Administrator |
using | Feature | Access | handset. | and ask to have the feature enabled |
Codes. |
|
|
| for your handset. |
|
|
| System does not use default Fea- | Contact your System Administrator |
|
|
| ture Access Codes. | for a list of the supported Feature Ac- |
|
|
|
| cess Codes for your system. |
Calls are not ringing the | A feature such as Call Forwarding | Enter the Clear All Features Access | ||
handset. |
| Always is enabled that prevents | Code (Default Code is ∗77) | |
|
|
| your handset from receiving calls. |
|
|
|
|
|
|
M Mitel (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. © 2012, Mitel Networks Corporation. All rights reserved.