Talk/Batt Low

PROBLEM	SOLUTION

TALK/BATT LOW	• The battery is low.
LED blinks.	→Recharge the battery.
The handset does	• The handset is located too far away from the base or
not ring or receive a	the battery has been discharged.
page.	→Return the handset to charge when your call is
	finished.
	• The digital security code has changed.
	→Remove the handset from the base unit and press
	and hold PAGE . While the handset is emitting, return
	the handset to the base unit.
	• The battery is low.
	→Place the handset on the base unit to recharge.
CHARGE LED does	• The charging contacts of the handset and the base are
not light when the	not clean.
handset is placed on	→Clean them with a dry cloth.
the base.	• The AC adaptor of the base unit is disconnected.
	→Plug the AC adaptor firmly into the base unit and AC
	120V outlet.
	• The handset is not on the base.
	→Place the handset on the base properly
Noise or	• The handset is too far from the base unit.
interference.	→Bring the handset near the base unit.
	• The battery is low.
	→Place the handset on the base unit to recharge.
	• The base unit is located in a place with high
	interference.
	→Relocate to another outlet.
	• Interference from TV, Microwave oven, Computer and
	electrical appliances.
	→Press CHANNEL to select a clearer channel, or relocate
	the base unit.
	• Excessive line noise.
	→Check with another telephone.
	• The volume control is set too high.
	→Reduce volume to lower setting.
	• The base antenna is not in a vertical position.
	→Lift the antenna to a vertical position.
The unit does not	• The phone needs to be reset.
operate properly.	→Disconnect the AC adaptor and reconnect it after a
	few seconds.
When the handset is	• This is normal.
returned to the base	→It may be prevented by changing the volume setting
unit with the volume	to Medium or Low before returning the handset to the
level set at Max, a	base unit.
momentary squeal
or howling sound
may sometimes be
heard.

PROBLEM