Toshiba DKT2204-CT manual Charging Unit Wall Mounting

Page 31

Installation

Step 6: (Optional) Wall Installation

Charging Unit Wall Mounting

The charging unit is also designed to be wall mounted. Before mounting your charging unit, consider the following:

•

•

•

Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Make sure the wall material is capable of supporting the weight of the charging unit.

Use #10 screws with anchoring devices suitable for the wall material where the charging unit will be placed.

DKT2204-CT

1.Insert two mounting screws 1-9/10 inches apart. Allow about 3/16 of an inch between the wall and screw heads for mounting the telephone.

2.Plug the AC adapter into the charging unit as previously described. Wrap the AC adapter cord around the strain relief (shown right).

3.Place the charging unit on the posts of the wall screws and push down until it’s firmly seated (shown right).

4. Plug the AC adapter into a standard 120VAC wall outlet.

Strata CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones 06/03

21

Image 31

Contents DKT2204-CT/DKT2304-CT Cordless Digital Telephones User Guide Publication Information Toshiba America Information SYSTEMS, INC. Tais Toshiba America Information Systems, Inc Contents Handset Operation Troubleshooting and Specifications Contents Organization IntroductionRelated Documents and Media ConventionsGrand Tour Technology Benefits ApplicationsHandset DKT2204-CT 0VJ Redial Button DKT2304-CT212 Base Unit LCD DisplayCharging Unit Cordless Digital Telephone Standard Parts Grand Tour Review Safety Instructions Installation2Installation Installation Place DKT3000-series Telephones into 2000-Mode Select LocationTo connect as a stand-alone telephone Connect Telephone CablesBase Unit Connect and Apply PowerCharging Unit Standard Wall Plate Mounting Optional Wall InstallationTo wall mount the base unit Direct Wall MountingDKT2204-CT Charging Unit Wall MountingDKT2304-CT Raise the Base Unit Antenna Install Handset Battery PackCharge Batteries for First Time Install Headset OptionalTo remove the belt clip Attach Belt Clip OptionalInstallation Handset Operation Earpiece VolumeHandset Controls Handset Ringer Mute DKT2304-CT only Handset Ringer Tone and VolumeVibrate Mode Mute DKT2204-CT onlyRinger Off Slide Switch DKT2204-CT only F1~F4 Feature ButtonsInternal Call Making a CallExternal Call Answer a Call Retrieve Messages Place a Call on HoldTransfer a Call Redial a NumberTo conference calls Conference Calls Using Strata CTXAdding Voice Mail to a Conference Connecting Two Outside LinesSwitch a Call to the Desk Telephone Switch a Call to Your Cordless Digital TelephoneSwitch a Call to the Desk Telephone Feature Access Codes Feature Access Code Sequences Feature Access CodesFeature Access Codes Switch a Call to the Desk Telephone + Ext. Number Call Forward Procedure Feature Button Sequence Cancel Change Pass Code Feature Access Codes Troubleshooting Troubleshooting SpecificationsTroubleshooting and Specifications Low Battery Charging Spare Battery Packs DKT2204-CT only Cleaning Charging Unit ContactsSimultaneous Conversation Channels Range and Performance Telephone Line ProblemsRadio Interference Privacy Specifications Feature DKT2204-CT DKT2304-CT General SpecificationsDisa IndexIndex ~ W