Mitel 5207 manual Speed Call Personal, On-Hook Dialing, Auto-Answer

Page 12

Speed Call - Personal

Note: This feature must be set up by Telcom.

To dial a stored personal Speed Call number:

1.Lift the handset

2.Dial *33

3.Enter an index number between 00 and 09

To store a personal Speed Call number:

1.Lift the handset

2.Dial *32

3.Enter an index number between 00 and 09

4.Dial the number to be stored (press Hold between digits to create a three- second pause during dialing; press Hold more than once to lengthen the pause)

5.Hang up

On-Hook Dialing

To dial without lifting the handset:

1.If you want to use a Non-Prime Line, press a Line Appearance key

2.Dial the number

3.Lift the handset

Auto-Answer

Note: Telcom must program this feature key to a button

To enable or disable Auto-Answer

Press the Auto-Answerfeature key

To answer a call when you hear a ringback:

Communicate using the speaker and microphone

MITEL Networks 5207 IP Phone

8

Rev. 012805

User’s Guide

 

 

 

Image 12
Contents Mitel Networks 5207 IP Phone Mitel Networks 5207 IP Phone Rev User’s Guide Contents Call Handling About Your Phone Telephone Status Indicators Important Note for Headset UsersFor Users on Resilient 3300 ICP Systems Tips for Your Comfort and Safety Don’t cradle the handsetProtect your hearing Angle the phone for easier viewingHandset Receiver Volume Control Speaker Volume ControlCustomizing Your Phone Ringer ControlFeature Keys To adjust the Display Contrast while your set is idleDisplay Contrast Control Language ChangeMaking and Answering Calls Make a callAnswer a call RedialSpeed Call Keys To dial a stored Speed Call numberTo store a Speed Call number Speed Call Personal On-Hook DialingAuto-Answer Call Handling HoldTransfer Conference Conference SplitSwap To leave a ConferenceCall Forward To program Call ForwardTo turn Call Forward on and off once it has been programmed Call Forward Remote Call Forward End ChainingMessaging Advisory Messaging CallbackUsing Advanced Features Account CodesCall Park Call PickupCamp-on Do Not DisturbDirect Paging Handsfree Operation Headset OperationHeadset Operation with Feature Control Switch To disable the Headset OperationTo answer a call To mute the headset microphoneTo turn Music on and off when the set is idle To respond to a Group Page by using Meet Me AnswerMusic Group Paging / Meet Me AnswerHot Desking Hot Desk Remote LogoutTo log into a Hot Desking phone the phone must be idle To log out of a Hot Desking phone the phone must be idleMTU Feature Access Codes for Mitel IP Phones Cancel Call Forwarding End Chaining TM, Trademark of Mitel Networks Corporation