Mitel 4015 manual Customizing Your Phone, Changing Handsets, Ringer Control

Page 8

Changing Handsets

Your SUPERSET 4015 telephone is compatible with several specialty handsets. To remove the handset shipped with your set from the handset cord:

1.Bend a paper clip to produce approximately 4 cm (1.5 in.) of straight wire.

2.On the handset, locate the plastic groove leading into the handset jack. The groove is on the side of the jack that is closest to the handset microphone.

3.Slide the end of the wire into the handset jack along the groove until it stops underneath the handset cord clip.

4.While gently pulling on the handset cord, use the wire to pry the clip upward. The cord will separate from the handset.

5.Store the original handset in a safe place.

CUSTOMIZING YOUR PHONE

Ringer Control

To adjust the Ringer Volume while the set is ringing:

zPress or.

To adjust the Ringer Pitch while the set is idle:

1.Press SUPERKEY.

2.Press # until "Ringer Adjust?" appears.

3.Press *.

4.Press *.

5.Press or.

6.Press #.

7.Press SUPERKEY.

-4-

Image 8
Contents User Guide Page Contents Using Mlpp Feature Access Codes Telephone status indicators About Your PhoneTips for Your Comfort and Safety Adjusting the viewing angleDont cradle the handset Protect your hearingPage To adjust the Ringer Volume while the set is ringing To adjust the Ringer Pitch while the set is idleCustomizing Your Phone Changing HandsetsHandset Receiver Volume Control Speaker Volume ControlFeature Keys Display Contrast ControlMaking and Answering Calls Make a callAnswer a call RedialTo store a Speed Call number Speed Call KeysTo dial a stored Speed Call number Auto-Answer Speed Call PersonalOn-Hook Dialing Transfer Call HandlingHold Conference Conference SplitSwap To leave a ConferenceTo turn Call Forward on and off once it has been programmed Call ForwardTo program Call Forward Call Forward I Am Here Messaging Advisory Call Forward End ChainingCall Forward Override Account Codes Using Advanced FeaturesMessaging Callback Call Pickup CallbackCall Park Campon Do Not DisturbOverride PagingDirect Paging Headset OperationHeadset Operation with Feature Control Switch To turn Music on and off when the set is idleMusic To answer a callTo respond to a Group Page by using Meet Me Answer Group Paging / Meet Me AnswerTrunk Flash To make a GroupUsing Mlpp To make a precedence callTo answer a precedence call To respond to preemptionFeature Access Codes