Nokia HF-200 manual Installation in a car, General safety instructions

Page 9

device, ensure that the other device is on, and press the answer/ end key; or make the connection in the Bluetooth menu of your device.

You may be able to set your mobile device so that the speakerphone connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu.

Installation in a car

You can attach the speakerphone to the sunvisor of your car using the supplied clip.

General safety instructions

When you install the speakerphone in a car, ensure that it does not interfere with or hinder the systems used in the operation of the vehicle (for example, airbags) or disturb your field of vision while driving.

Check that the deployment of the airbags is not blocked or impaired in any way. Only operate the

speakerphone if it is safe to do so under all driving conditions.

To use the speakerphone when it is attached to the sunvisor, ensure that the sunvisor is up at the car roof (8).

Attach the speakerphone to the clip

To attach the speakerphone to the clip, turn the speakerphone sideways, push it towards the clip (9), and turn it clockwise (10) until it locks into place.

© 2008 Nokia. All rights reserved.

9

Image 9
Contents Nokia Speakerphone HF-200 1512 Nokia. All rights reserved For your safety IntroductionWhich could affect performance Get started A Bluetooth connection, the mobile deviceChargers Charge the batterySwitch on or off Ensure that your mobile device is switched onPair with another device Speakerphone. The green Indicator light flashes slowlyGeneral safety instructions Installation in a carBasic use Adjust volumeAttach the clip to the sunvisor CallsClear settings or reset Battery information TroubleshootingFully charged battery will lose its charge over time Never use any charger that is damaged Care and maintenanceDo not attempt to open the device Additional safety information