NetComm V100 manual Appendix C Cable Connections, RJ-45 Network Ports, Twisted pair cables

Page 34

Appendix C: Cable Connections

This cable information is provided for your reference only. Please ensure you only connect the appropriate cable into the correct socket on either this product or your computer.

If you are unsure about which cable to use or which socket to connect it to, please refer to the hardware installation section in this manual. If you are still not sure about cable connections, please contact a professional computer technician or NetComm for further advice.

RJ-45 Network Ports

RJ-45 Network Ports can connect any networking devices that use a standard LAN interface, such as a Hub/Switch Hub or Router. Use unshielded twisted-pair (UTP) or shield twisted-pair (STP) cable to connect the networking device to the RJ-45 Ethernet port. Depending on the type of connection, 10Mbps or 100Mbps, use the following Ethernet cable, as prescribed.

10Mbps: Use EIA/TIA-568-100-Category 3, 4 or 5 cable.

100Mbps: Use EIA/TIA-568-100-Category 5 cable.

Note: To prevent loss of signal, make sure that the length of any twisted-pair connection does not exceed 100 metres.

RJ-45 Connector

 

Pin Assignment

Normal Assignment

 

 

1

Input Receive Data +

2

Input Receive Data -

3

Output Transmit Data +

6

Output Transmit Data -

4,5,7,8

Not used

 

 

Figure 1

Twisted pair cables

Figures 1 and 2 illustrate the use of straight-through and crossover twisted pair cables along with the connector.

RJ-45 plug attached to cable

Figure 2

V100 User Guide

YML749Rev1

34

www.netcomm.com.au

Image 34
Contents Page Contents YML749Rev1 V100 User Guide Introduction Understanding VoIP Minimum System Requirements Do I need a Micro filter? Package Contents Front Indicators V100 ATA OverviewBack Panel Label DescriptionResetting the V100 ATA to its factory default settings V100 Start UpInstalling the V100 ATA Before continuingConnecting the V100 ATA to an Adsl Router/Modem Option a Ethernet Adsl Internet ConnectionModem Internet access Option B Optus/Telstra Cable Internet ConnectionInstalling the V100 ATA Utility Using the V100 ATA Configuration Utility Status TabUsed respectively Connection Mode Tab DhcpGateways address through which the V100 ATA communi SIP Tab LocalPhone Configuration Call Forward YML749Rev1 V100 User Guide Stun Tab Telephone Book Tab Reach. And the remote party must use this username to accept Tool Tab DiagnosticSystem Upgrading the V100s Firmware Appendix a Flow Chart of Configuring V100 PPPoE ModeV100 Dhcp Mode V100 Fixed IP Mode Appendix B Troubleshooting WAN LED is offCannot get bi-directional conversation RJ-45 Network Ports Appendix C Cable ConnectionsTwisted pair cables To RJ-11 adapter Appendix D Registering your NetComm Product NetComm Contact InformationAppendix E Legal & Regulatory Information Customer InformationProduct Warranty Limitations of Warranty

V100 specifications

The NetComm V100 is a cutting-edge device designed to meet the demands of modern connectivity while delivering high-performance solutions for both residential and commercial environments. With its sleek design and advanced features, it stands out as a reliable option for users seeking robust network capabilities.

One of the primary attributes of the NetComm V100 is its versatility in supporting various networking protocols. It is equipped with dual-band Wi-Fi technology, enabling users to connect on both 2.4 GHz and 5 GHz frequencies. This dual-band support ensures minimal interference and maximizes speeds, accommodating multiple devices simultaneously without compromising performance.

The V100 boasts a powerful processor that facilitates seamless browsing, streaming, and online gaming. The device is designed to handle high data loads effectively, making it an excellent choice for households with multiple users or businesses needing reliable connectivity for various applications. Additionally, advanced Quality of Service (QoS) features prioritize bandwidth allocation according to user needs, ensuring that critical applications receive the resources they require for optimal performance.

Security is another area where the NetComm V100 excels. It incorporates advanced security protocols such as WPA3, the latest in wireless security technology, which enhances protection against unauthorized access and potential threats. Furthermore, the device supports a comprehensive firewall and various networking protections, making it suitable for environments where security is vital.

The V100 also offers multiple connectivity options, including Ethernet ports for wired connections. The integrated USB port allows for file sharing across the network, enabling users to access printers and external storage with ease. This is particularly beneficial for small offices or home networks that need shared resources without compromising on speed.

Moreover, the NetComm V100 is designed with user convenience in mind. It features an intuitive web interface that simplifies setup and configuration processes. With clear instructions and user-friendly navigation, even those with minimal technical know-how can establish a robust network in no time.

In conclusion, the NetComm V100 is a versatile and powerful networking device tailored to modern connectivity needs. Its combination of dual-band support, high processing power, enhanced security features, and user convenience positions it as an excellent choice for anyone looking to enhance their networking experience. Whether for home or business use, the V100 is equipped to deliver reliable and fast internet connectivity, making it a standout in the ever-evolving tech landscape.