Digit | GE 25893 instruction

3.Press any number key (0-9) to store the phone number in that memory location.

4.Press memory and ENTER NAME shows on the display.

5.Use the handset number pad to enter the name, then press memory and ENTER TEL NUMBR shows on the display.

6.Press redial to display the redial number and name.

7.Press memory again to confirm.

NOTE: If the redial number has more than 24 digits, the redial number cannot be stored in memory.

To replace an old redial number stored in a memory location with a new redial number:

1.Repeat steps 1 through 5, then press redial to display the new redial number and name.

2.Press memory again and the new redial number replaces the old redial number in that memory location.

DIALING A CID NUMBER

1.Make sure the phone is OFF (not in TALK mode).

2.Use the CID/VOL left (-) or right (+) arrow button to display the desired Caller ID record.

3.Press the TALK/callback button to dial the number.

CHANGING THE NUMBER FORMAT

The FORMAT button lets you change the format of the displayed number. The available formats are as follows.

7-digit	7-digit telephone number.
10-digit	3-digit area code + 7-digit telephone number.
11-digit	long distance code “1” + 3-digit area code + 7-digit
	telephone number.

1.Make sure the phone is OFF (not in TALK mode).

2.Use the CID/VOL left (-) or right (+) arrow button to scroll to the number you want to call back.

7-digit