Lennox Hearth 50 manual Volume setting telephone, Volume setting for loudspeakers

Page 5

Volume setting telephone

 

Lift the handset, make a call and put the

and

handset to one side.

Switch to loudspeaker by turning on your

Konftel 50.

 

Volume setting for loudspeakers

and

Set the volume in the loudspeakers with the

 

help of the - and + buttons. Note that the

 

system telephone volume control affects the

 

volume in the Konftel 50 loudspeakers.

Volume setting for microphone

Keep the mute button pressed in for about 3 seconds until the LEDs start flashing and you hear an uninterrupted tone.

Press – or + to adjust the microphone

and

volume.

Speak with a normal calling voice and the receiving party can then ask you to increase or decrease the volume. Change the volume one stage at a time.

Press the mute button when you have finished setting the volume.

The volume setting is saved in the event of power failure.

ENGLISH

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents User guide Conference unit Konftel Following parts included Contents Connection to telephone Volume setting for microphone Volume setting telephoneVolume setting for loudspeakers Call with Konftel Switch between handset and loudspeakerDialling Answer callManual trimming Mute functionAutomatic trimming Connect in the following order Connection to PCVolume setting loudspeakers Volume setting PCIncoming call Call via PCDialling with PC Manufacturer PBX type TroubleshootingSwitch position Maintenance Troubleshooting, maintenance, accessoriesAccessories Art no Designation Poor sound quality, echoCentral unit Technical Data
Top Page Image Contents