Receiving a call/AutoTalk set to OFF
Handset is in the cradle | Handset is off the cradle | ||
|
|
|
|
1) | Remove the handset from the | 1) | Flip the top panel up. |
| charging cradle. | 2) | Press talk/flash. |
2) | Flip the top panel up. |
|
|
3) | Press talk/flash. |
|
|
|
|
|
|
Hanging Up
Press end or close the top panel.
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press (speaker phone) on the
handset. To switch from a speakerphone call to a normal call, press (speaker phone).
Moving out of range
If you move your handset farther from the base unit during a call, you might start to hear more noise than usual. If you go too far from the base, you'll hear a beep and see No Signal Press HELP on the display. The base will stay connected to the caller for another 35 seconds, so you can move back within range to return to the call.
note
•If Open to Answer is ON, the phone will automatically answer the call when you flip the top panel up (see page 22 for setting).
•If Any Key Answer is set to On, you can also press any number key on the keypad to answer a call (see page 22 for setting).
•While using the handset speaker phone or a headset, closing the top panel will not hang up the call.
•To scroll through the help, press the >> soft key or right key.
[ 3 5 ] Using Your Phone | w w w . u n i d e n . c o m |