Placing a Call on Hold
During a call, press back/hold/int'com and then end, to put the |
|
call on hold. Press talk/flash to go back to the call. | 570# |
Conferencing
If you have more than one handset, two handsets can talk to
the outside caller at the same time in a conference call. Once a *QNF
call is in progress, press talk/flash to join the call. To hang up, press end. The other handset will still be connected after you
hang up. If the other handset is in privacy mode, you won't be able to join the call.
note
•If you leave a call on hold for more than 5 minutes, warning tone sounds and Hold
reminder! Answer held line appears,
and the line will disconnect in 15 seconds.
Redialing Calls
You can quickly redial the last 20 phone numbers for each handset.
With the phone in standby mode, press redial/ on the handset. This brings up the redial list. Use the up/down key to scroll through the numbers, and select the number
you want to dial. Press talk/flash (or ) or the CALL soft key to dial the selected number.
You can also display the redial list with the phone in talk mode. After selecting the redial number, press the DIAL soft key to redial the number.
4GFKCN
%#.. 126+105
•If someone is using another handset in Privacy Mode,
Unavailable appears
in the display and you cannot join the call.
[ 3 7 ] Using Your Phone | w w w . u n i d e n . c o m |