Konftel 55W manual Headsets, Headset level, Feature layer

Page 35

SETTINGS

Headsets

This setting allows you to adapt the headset port for different headsets.

Most headsets with a 3.5 mm plug have three (mono) or four (stereo) interfaces with the microphone's connector furthest out on the top. If your headset does not work, it may be because it has another position on the interfaces.

Headset level

Sensitivity (audio volume) can vary from headset to headset. It is therefore possible to adjust the volume so that the sound heard seems to be about the same level as when heard via the speakers.

Warning!

Use of headphones/earbuds at high volumes can damage your hearing.

A higher volume may be harmful to hearing if you have a high-sensitivity headset.

Note that for safety reasons, this setting is reset when you remove your headset. This is because another headset that is connected may be more sensitive.

Feature layer

Using this setting, you can select your preferred UC solution or choose to turn the function off. Microsoft® Lync® is selected by default, which means that if the Konftel 55W detects that the Lync® client is being used by the computer, Lync® feature layer will be displayed on the Konftel 55W.

33

Image 35

Contents Konftel 55W User Guide OmniSound HD superior sound quality Contents Introduction MaintenanceDescription General Support for UC solutions LEDsDescription Mute button Power save modeSwitching off Bridge Connection BatteryInserting a battery Connecting to a Desktop Phone Using the Konftel with a Desktop PhoneTransferring and ending calls Using the Konftel with a Desktop PhoneAdjusting the volume Making CallsAutomatic detection of mobile phone Using the Konftel with a Mobile PhoneCable Connection to a Mobile Phone Ending calls Using the Konftel with a Mobile PhoneHold Transferring callsConnection to a Computer Using the Konftel with a ComputerUsing the Konftel as a conference unit Using the Konftel with a ComputerUsing the Konftel with a Computer Using as a computer speakerPairing and Connecting Using the Konftel with BluetoothOption 1 pair and connect from your mobile Using the Konftel with BluetoothOption 2 pair and connect from the Konftel 55W Connecting a Phone That is Already Paired Option  Dial the number on your mobile phone Answering incoming callsUsing the keypad during a call Connecting and transferring a mobile call in progress Press to end the call or end the call from the mobile Making calls Connecting a Phone with Headset ProfileIncoming calls Switching between the phone and the Konftel 55WBluetooth and cable-connected phone Using Multiple ConnectionsSwitching Between Connections Bluetooth with Headset Profile Using Multiple ConnectionsBridge Connection Adjusting the VolumeAdjusting the level of each sound source individually Bridge Connection Bluetooth Headset Using a HeadsetRecording Recorder CapabilityListening to a Recording Recorder CapabilityChanging Languages Settings Key tone Settings Adjusting Sound Effects Ring levelMobile phone connection Changing Connection SettingsBluetooth Desk phone adapter configurationMobile phone microphone level Desk phone adapter microphone levelHeadset level HeadsetsFeature layer Changing System Settings Updating software Installing Konftel Upgrade UtilityUpgrading Software Upgrading from a PCUpgrading VIA AN SD Card Downloading upgrade filesUpgrading Software Sound Technical DataPower supply ConnectivityEnvironment Technical DataHead office Konftel AB, Box 268, 901 06 Umeå, Sweden Rev 4A