IBM manual Set up your Janam XM60, Locate front panel controls, Locate back panel components

XM60 User Manual

4

Set up your Janam XM60

Locate front panel controls

•Power button (on top of device). Pressing the power button turns the handheld computer on (if it is off) and returns to the last screen that was displayed. Press the power button to turn the handheld computer off.

•Use the backlight to illuminate the screen in low-light conditions. Hold down the power button for about two seconds to turn the backlight on and off.

•Janam XM60 screen. Displays the applications and data stored in your handheld computer. It is touch-sensitive and responds to the stylus.

Locate back panel components

•Stylus channel. Holds the stylus. To use the stylus, remove it from the channel and hold it as you would a pen or pencil.

•IR port. Uses infrared technology to transmit and receive data to and from other handheld computers, and to perform ActiveSync operations.

•Reset button (located under battery cover). Under normal use, you should not have to use the reset button.

•USB/serial connector. Connects your handheld computer to a PC via a USB or serial cable or by inserting XM60 into a Janam cradle.

Tap versus click

Tapping is the basic action used to execute tasks, so use the stylus to tap elements on your handheld computer’s touch-sensitive screen. You can drag the stylus to select text, or use the stylus to drag the slider of any scroll bar.

IMPORTANT: Always use the point of the stylus for tapping or making strokes on the handheld computer screen. Do not use a pen, pencil or any other sharp object to write on the screen.

Recalibrate the screen

The first time you start the Janam XM60 handheld computer, setup instructions appear onscreen. These instructions include a calibration screen, or digitizer. Calibration aligns the internal circuitry of the handheld computer with its touch-sensitive screen so your handheld computer can detect the task you want to perform when you tap an element on the screen. You can also recalibrate your screen at any time.

To recalibrate your screen:

1.Tap the MS Windows icon > settings > control panel > stylus.

2.Select double tap menu, and follow the instructions.

3.Tap calibration menu, and follow the on-screen instructions, tapping the screen where indicated.

Janam Technologies LLC 4-1