Quick Reference
Changing Settings or Performing Tests in Local Mode
1Make sure the handset is turned off.
2Press and hold "for 3 seconds.
3While still holding ", press O.
4Press one of the following:
A (2) to enable or disable the alerter.
L(5) to enable or disable backlighting.
P (7) for 3 seconds, then " to enable or disable
Line Preselection.
V(8) to enable or disable the vibrator.
W(9) to enter Wireless Test Mode, then 1 for signal strength 2 for voice quality 3 for matching radio module and slot number 5 for handset power settings # to enter Local Test Mode.
5Press O to exit.
!CAUTION:
The MDW 9031/9031DCP handset is a radio device and, like all radio devices, should not be placed next to a pacemaker. See “Guidelines for Safe and Efficient Operation” in the MDW 9031/9031DCP Wireless Pocket Phone Installation and Use guide for more information.
MDW 9031/9031DCP Wireless Pocket Phone Quick Reference
8 Issue 2 February 1999 |