Quick Reference
Handset Display
3 4 5 6
1
2
8
7
9
1Information you would see on a wired system phone’s display, (except time), based on your communications system:
LCL:P, D, M1, or M2 = Local Mode: communications system
WIRELESS TEST = Handset in Wireless Test Mode VIBR = Vibrator enabled
PSEL = Line Preselection enabled PRESELECTION:ON/OFF = Line Preselection Mode:status CHANGE BUTTN MAP = Communications system setting is wrong
MAP:P, D, M1, M2 = Button Mapping Mode: setting
NO LINK = Handset is not communicating with radio module
2MSG indicates that you have a message.
3RANGE indicates that the handset is out of range or almost out of range. Handset also beeps.
4ON indicates that handset was turned on by pressing O.
5Battery icon flashes to indicate a low battery condition. Handset also emits 2 beeps.
6No Ring icon indicates that the alerter is disabled.
7MUTE indicates that handset microphone was turned off by pressing
M.
MDW 9031/9031DCP Wireless Pocket Phone Quick Reference
2 Issue 2 February 1999 |