Lucent Technologies 108488222 manual Desktop Installation

Page 15

CALLMASTER® V Telephone Console User’s Guide 555-233-735

Issue 1

Telephone Installation

11

 

 

Desktop Installation

Note: You can use the telephone without the desktop stand, if you so choose.

If you do not use the telephone with attached desktop stand, it is suggested that you place small round feet (included in a plastic bag in the box in which the telephone was packed) on each corner of the bottom of the telephone housing.

1.Turn the telephone face down on a flat surface.

2.Remove the desktop stand (the upper tabs on the stand are shown as 2 in Figure 4; the lower tab slots are shown as 6 in Figure 4). Also see Figure 5 which shows removing the desktop stand.

3.Snap one end of the line cord into the “LINE” jack ( 4 in Figure 4) on the bottom of the telephone.

4.Connect the expansion module by snapping one end of the expansion module cord into the “XM24” jack on the back of the telephone ( 3 in Figure 4).

5.Thread the line cord (and expansion module cord, if appropriate) through the routing channel leading to the top of the desktop stand (1 in Figure 4). Make sure that the line cord is placed securely under the square tab (7 in Figure 4) to the left of the “LINE” jack and that the line cord (and the expansion module cord, if appropriate) is also placed under the square tabs in the routing channel.

Note: If you are using an auxiliary power supply such as the 1151A1 or 1151A2 Power Unit, plug the line cord into the “PHONE” jack on the auxiliary power supply.

6.Turn the telephone right side up, with the front facing you.

7.Plug the quick-disconnect (QD) connector on the headset into the QD connector on the headset cord already plugged into one of the Headset jacks (5 in Figure 4) on the back of your telephone.

8.If appropriate, snap the free end of the expansion module cord into the TEL SET jack on the expansion module.

9.Snap the free end of the line cord into the modular wall jack.

Note: If you are using an auxiliary power supply such as an 1151A1 or 1151A2 Power Unit, plug the power supply cord from the power unit’s “LINE” jack into the modular wall jack.

10. Turn on the headset OR press Spkr (or

) and listen for dial

tone. If there is no dial tone, check all wire connections to make sure they are secure.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Callmaster V Telephone Console User’s Guide To Order Copies of this Document Callmaster V Telephone Console User’s GuideUse IiiService Callmaster V Telephone Console, Front View Callmaster V Telephone Console User’s Guide IssueHeadset On/Off button Headset Connections with the CallmasterSoftkeys Callmaster V Recorder InterfaceTo turn on your headset Call-Handling FeaturesOther Softkey Features That May Be On Your Display Headset ON/OFFConference HoldRedial Release To disconnect from a callTo turn off the speaker and return to headset use Message Getting MessagesTest TransferTo select a personalized ringing pattern Voice and Display FeaturesSelecting a Personalized Ring Select RingOperating Range Requirements Telephone InstallationPin Pair Name Description Important Safety Warnings for InstallationDesktop Installation Removing the Desktop Stand Wall InstallationPlacing the Telephone on the Wall Jack Mounting Studs Installing the Designation CardFollowing cards and equipment are orderable Orderable Cards and Equipment

108488222 specifications

Lucent Technologies, a prominent name in the field of telecommunications, has made a significant impact with its innovative solutions and technologies. With the model number 108488222, the company has introduced a groundbreaking product that reflects its commitment to advancing communication systems.

One of the main features of the Lucent Technologies 108488222 is its robust performance. Designed to handle high volumes of data transmission, the 108488222 facilitates seamless communication across various platforms. This capability makes it an ideal choice for both large enterprises and service providers looking to improve their operational efficiency.

The 108488222 is equipped with cutting-edge technologies that enhance its functionality. For instance, it utilizes advanced signal processing algorithms, which play a crucial role in optimizing data flow and reducing latency. This allows for real-time communication, making it particularly suited for applications that require instant feedback, such as video conferencing and online gaming.

In addition to its high-performance capabilities, the Lucent Technologies 108488222 emphasizes scalability. Its modular architecture enables organizations to expand their systems as needed, without significant overhauls. This adaptability is particularly important in a technology-driven environment where demands can shift rapidly.

Security is another key characteristic of the 108488222. In today's digital landscape, protecting sensitive data is paramount. Lucent Technologies has integrated advanced encryption protocols within the 108488222, ensuring that all communications remain secure from potential threats. This focus on security provides peace of mind for businesses that rely on the integrity of their data.

Moreover, the 108488222 is known for its user-friendly interface, allowing administrators to easily manage and monitor network performance. This intuitive design lowers the barrier for entry, enabling organizations to maximize their use of the technology without the need for extensive training or technical support.

In conclusion, the Lucent Technologies 108488222 stands out due to its robust performance, advanced technologies, scalability, security features, and user-friendly design. As communication needs continue to evolve, products like the 108488222 will remain at the forefront of enabling efficient and secure telecommunications.
Top Page Image Contents